Let's build an airplane that has no definite fuselage. An RC flying wing, some people call it zagi wing but it's the same, these kind of aircraft are very unstable and need a special airfoil to help have a stable flight, so CG is critical as well to help, I struggled a bit balancing and experimenting with it and its stability, but in the end I managed to have a decent stable flight. Download the plans and templates here: http://joyplanes.com/go/planos-ala-v/ CG calculator: http://fwcg.3dzone.dk/ List of materials and tools: -Foam...You can use any kind of foam, if you use epp sheets then the building technic is different. -Epoxi glue. -Wood rods. -Balsa wood. -Colored tape or packaging tape. -All electronics (list and links below). -Foam cutter (make one at home). ******************************************************************** List of electronics you can use. Radio http://joyplanes.com/go/r2/ Metal gear servos https://goo.gl/9y4ZJH Motor https://goo.gl/hA7qLY or https://goo.gl/Ho1K7Y Propellers https://goo.gl/tTXBeb ESC https://goo.gl/mHVGPX Battery https://goo.gl/7pgFoV Battery charger https://goo.gl/p3cfkA FPV camera https://goo.gl/w4qwDn FPV VTX http://joyplanes.com/go/vtx1/ Goggles http://joyplanes.com/go/gogg1/ ******************************************************************** Subscribe: https://goo.gl/zKQ706 Instagram https://www.instagram.com/joyplanes/
Просмотров: 135566 Joyplanes RC 2
The Building footage of Flying Wing Tiko V3 find the plans and further information here http://flitetest.com/articles/1-sheet-foam-board-24-x36-flying-wing-v3 https://drive.google.com/file/d/0B3VEn-rEUd0iYXdPOFg5NEt3bDA/view the parts: http://www.hobbyking.com/hobbyking/store/__6460__Hobbyking_SS_Series_25_30A_ESC.html http://www.hobbyking.com/hobbyking/store/__41708__Turnigy_TG9e_9g_1_5kg_0_10sec_Eco_Micro_Servo_Long_Wire_Version.html http://www.hobbyking.com/hobbyking/store/__18198__Floater_Jet_Replacement_Motor_AXN_2208_2150_.html http://www.hobbyking.com/hobbyking/store/__22423__APC_Style_Propeller_6x4_2pc_.html http://www.hobbyking.com/hobbyking/store/__8932__Turnigy_2200mAh_3S_20C_Lipo_Pack.html http://www.hobbyking.com/hobbyking/store/__12339__Turnigy_9X_2_4GHz_8Ch_Receiver_V2_.html
Просмотров: 895797 Kartiko Nugroho
The is my scratch build 47" flying wing that I will be using for FPV in the near future. I haven't decided what motor/esc combo I'll be using. This wing design came from another you tube member FPVTrond. Below is the link to his video tutorial on how to make this giant wing. His design is a for 49" wing. This is my version of it. The material that I had laying around only allowed me to build at 47". Enjoy. http://www.youtube.com/watch?v=7d5QCwWgnAg
Просмотров: 74625 940 RC
Flight Footage and Maiden Flight: http://www.youtube.com/watch?v=-3UKcL49dvs https://sites.google.com/site/projectflightd/ This is a quick build video for my RC Delta Pusher design. I do not go into every single litte detail about how to build this wing, you do need some basic scratch building skills to complete this project - but this is a very simple scratchbuilt platform for park flying! Center of Gravity = 7 inches from nose Dimensions: Wingspan: 30 inches Root Chord: 11 Tip Chord: 9 (including 2 inches of elevon) Sweep: 9 Weight: 250 grams (without the battery, with the motor, ESC) PDF plans: http://www.intensewalkera.webspace.virginmedia.com/ Supplies: 1 x 30" x 20" foamboard sheet 1 x 30" x 15" 1/2 inch pink foam Strapping tape Hot glue Popsicle sticks Control horns/push rods Motor with mounting system Velcro Tools: Knife, ruler, pen, hotglue gun, pliers Electronics: Servos: 9 gram T-Pro servos ESC: 18A ESC Motor: Original motor - 1300 kV blue wonder from HeadsUpRC New motor - 1300 kV Emax 2822 from HeadsUpRC Rx: Orange Rx 6 Channel DSM2 compatible Tx: Dx7se Let me know what questions you have or any recommendations!
Просмотров: 104813 ProjectFlightDesign
If you like this video please subscribe. I have over 280 flying videos on my channel with more to come! Combat radio controlled flying wings soaring off dunes getting into the action. Video from my 'mothership' combat wing, which sustained numerous hits, close calls and the odd win! A great afternoon helped by a good 18 to 20+ knot SSWesterly wind and up to 8 flying wings at a time. Most of the wings are Hobbyking Wicked Wings or variations of them. Music is appropriately titled 'Drop and roll' by Silent Partner. Video from a RD32 wing camera.
Просмотров: 3631 MrWaz11
Drone Camps shows you the cheap way to make a long range fpv wing. The ZOHD Orbit is $100, lightweight, 20mins flights, and detachable wings. We show what flight controller and PDB to use. Get miles away with just a simple 5.8ghz setup. List of parts for this project and resources below : ZOHD ORBIT EPP Wing $109 Link here : https://goo.gl/Z5pGU8 MATEK F405 STD Flight Controller for iNav Link here : https://goo.gl/Lty1ge MATEK PDB FCHUB Link here : https://goo.gl/X1q115 BN-800 Glonass GPS Module $17 Link here : https://goo.gl/mxSzTq Buzzer Link here : https://goo.gl/zRKuN2 Aomway 5.8ghz Antenna Link here : https://goo.gl/LevmBB AKK X2 Ultimate 5.8ghz 1200mw Video Transmitter Link here : https://goo.gl/TgYsyz 4S 1500mah Battery with XT60 connector Link here : https://goo.gl/GkuzjG Team Black Sheep Crossfire Modules and Receiver info : http://www.team-blacksheep.com Download the iNav Configurator for Chrome Link here : https://goo.gl/DrAUHh Special thanks to Stewart and Elvan : ------------------------------------------------------------------- See the AMAZING full fpv wing edit by Stewart please see his video here : https://vimeo.com/270865567 Check out Mr. Miyagi's Youtube Channel here : https://goo.gl/s2FS32 *Drone Camps is not responsible for your actions outside of Youtube. Please fly responsibly. Links to some of my hobby favorites below : Justin's Pick's : My Hobby Radio of choice : Frsky TARANIS X7 below. Black : https://goo.gl/yAgKMT White : https://goo.gl/NVVGxC New Blue Taranis X7S version here : https://goo.gl/cQDAQM Carbon fiber X7S : https://goo.gl/CfPauy My favorite race quad battery. Tattu 4S 1300mah Lipo Battery here : https://goo.gl/4dbuKj My favorite micro brushless quad : Link here : https://goo.gl/Jy2a9z Economy priced 4S 1300mah battery here : https://goo.gl/vUf2DU My current favorite 5" race quad : EMAX HAWK 5 Link here : https://goo.gl/t2g8Hm My drone landing pad here : https://goo.gl/9EnekC My favorite Fpv Goggles are the Fatshark HD3's here : Link here : https://goo.gl/z2PgQf Economy $50 pair of googles that have two diversity antennas. Great for the price. https://goo.gl/CLPiyy Latest up to date RC and FPV Specials : Link here : https://goo.gl/x5SUL8 Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please subscribe and I will keep up the great videos for you guys! Drone Camps on Youtube Subscribe for weekly new drones, honest reviews, prototypes, tutorials, and tech gadgets. - Mon - Fri Business Inquires: To get your product reviewed please email: drone camps @ gmail. com Drone Camps RC www.dronecamps.com LIKE us on Facebook https://www.facebook.com/dronecamps FOLLOW on Instagram: https://www.instagram.com/dronecamps/ Pilots : Sorry we do not provide free phone or email tech support for any drones shown on this Youtube Channel or on the web. Please leave a comment or question below for our community or Justin Davis to answer.
Просмотров: 30590 Drone Camps RC
This video is a little late, but here it is. *To see what I'm up to as it happens, follow me on https://www.instagram.com/sammsheperd/ Stuff Used in this Build: Emax 1306 4000kv Motor: Amazon: http://amzn.to/2kqLPrF Props: https://www.getfpv.com/racekraft-3x3-clear-4-blade-set-of-4-purple.html?gclid=CjwKCAiApJnRBRBlEiwAPTgmxOeCDghaudtaWf9SM3OVugj6g70TydFm2PR3TRBH0SuDOhJ370o8uBoCgj8QAvD_BwE DYS XM20a ESC: GB: https://www.gearbest.com/multi-rotor-parts/pp_354211.html?wid=21&lkid=12217411 Coupon: DYSXM Price: $9.99 Limited 40pcs for this price! Amazon: http://amzn.to/2kq1BmL Batteries: 650mah 4s: http://amzn.to/2AV2fz8 RunCam EAGLE 2: GB: https://www.gearbest.com/camera/pp_679609.html?lkid=12217404 Amazon: http://amzn.to/2korwLF 600mw Vtx: GB: https://www.gearbest.com/fpv-system/pp_260912.html?wid=21&lkid=12217420 Amazon: http://amzn.to/2BFHXX7 X4R - SB: GB: https://www.gearbest.com/multi-rotor-parts/pp_343509.html?wid=21&lkid=12217422 Amazon: http://amzn.to/2B2z65C Deluxe SPF3 W/ OSD: GB: https://www.gearbest.com/multi-rotor-parts/pp_436450.html?wid=21&lkid=12217430 Amazon: http://amzn.to/2BOOT55 LED's: Amazon: https://www.amazon.com/Lumenier-Digital-RGB-Board-6004/dp/B01HUHPLVS/ref=pd_lpo_vtph_23_lp_img_3?_encoding=UTF8&psc=1&refRID=3GDTVEPANDWB0M14SCHY Gfpv: https://www.getfpv.com/lumenier-digital-rgb-arm-led-board.html Digital Servo: (I can’t find what I used, try these?) Amazon: http://amzn.to/2BDamx8 Maybe this Push Rod will help: Amazon: http://amzn.to/2jjYAAR Night Owl (Black and White Night Vision Cam): Banggood: https://www.banggood.com/RunCam-Night-Eagle2-WDR-800TVL-FOV-140-Degree-43-Black-White-Video-FPV-Camera-NTSCPAL-Switchable-p-1209503.html?p=G316224679476201605D Amazon: http://amzn.to/2B3l9V4 RunCam 2 (Perfect for straping on RC things): GB: https://www.gearbest.com/action-cameras/pp_277710.html?lkid=12217590 Bangood: https://www.banggood.com/RunCam-2-RunCam2-HD-1080P-120-Degree-Wide-Angle-WiFi-FPV-Camera-p-1017010.html?p=G316224679476201605D Amazon: http://amzn.to/2kqntOJ FPV GOGGLES (Fat Shark Dom v3): http://amzn.to/2BORxYz Reveiver Module: http://amzn.to/2BMkOTO RC Controller: Taranis X9D plus: http://amzn.to/2kpPWnU Taranis Q X7: http://amzn.to/2BMWnW6 GoPros: Hero 5 Black: http://amzn.to/2kFmglH Hero 5 Session: http://amzn.to/2kFl7Xi ------------------ If you feel like it supporting: PATREON: https://www.patreon.com/samm_sheperd? FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it) *Thanks so much to these Patrons pledging $2 or more!* Woody Haller Peter Sripol Geoff Bowman Matt Breenden Joshua Bardwell Renoh Samvaran Sharma Stann Sheperd Zachary Enenga Gustav Spaanhede Normal Universe Caleb Crome
Просмотров: 50666 Samm Sheperd
Can you tell which side is up? ;) Hope you all enjoy this video, sorry I haven't gotten around to posting anything extensive recently, I've been very busy. This is a brief video of me flying a completely custom built KFM4 airfoil flying wing designed and built by my friend Stephen (who is also manning the camera). Enjoy! If you would like the plans to build the plane I may be able to provide them. Just ask :)
Просмотров: 3130 DroneDude
Here's one I built up just for fun over the past few days. It's a single sheet of foamboard, a friends design. Check out his thread on RCGroups here: http://www.rcgroups.com/forums/showthread.php?t=1442309 I built this one up with gear I had sitting around, so it's got a lot more power than it was originally designed for... lol I have a Suppo 2217-06 with a 7x6 APC-E prop, running on a 1300 Gens Ace 3S and a 30A ESC. It will go vertical like a rocket! Loads of power... and fun! lol Counting the foam, tape, glue, and all electronics, I have about $50 on it not including the transmitter. I kinda half expected it to blow apart on the full throttle passes! :D . __ Patreon: https://www.patreon.com/bonafidepirate You can help to support my channel by using the affiliate links below when making a purchase: Banggood - http://bit.ly/piratebgood eBay - http://ebay.to/2r7k3mb Amazon - https://www.amazon.com/shop/bonafidepirate Foxeer - http://www.foxeer.com/?u=499 You can also make a donation if you wish to do so at the following link: Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau Here's some affiliate links to the video gear I use from Ready Made R/C: 1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Просмотров: 125606 bonafidepirate
This is a scratch built version of the Toro Wing. EPP cut by flying friend George to be setup as a light weight slow night flier. I'll install some LED strips eventually. RCGroups build thread - https://www.rcgroups.com/forums/showthread.php?1863060-Twisted-Hobbys-TELINK-Toro-900-35-EPP-Wing Motor - Eachine 2204 2300kV Prop - 6 x 4" Battery - 2S 950mAH Flying weight - 330g Website links Newton Airlines Uncut - https://www.youtube.com/channel/UCuFf6eTdoSVa6VMlu_0smjA Newton Airlines blog - http://newtonairlines.blogspot.com.au Andrew Newton YouTube - https://www.youtube.com/channel/UC2QTy9BHei7SbeBRq59V66Q My portal - http://anewton.net More information iNAV fixed wing tips - http://newtonairlines.blogspot.com.au/search/label/iNav What HD cameras do I use - http://newtonairlines.blogspot.com.au/2017/07/what-cameras-do-i-use.html What FPV cameras do I use - http://newtonairlines.blogspot.com.au/2017/07/what-fpv-cameras-do-i-use.html What FPV gear do I use - https://newtonairlines.blogspot.com.au/2018/02/my-fpv-rig.html Building materials and RC gear - http://newtonairlines.blogspot.com.au/2015/03/materials-and-links.html Depron Armin Wing build - https://www.youtube.com/watch?v=h_RzXO5u3M0 VIDEO PLAYLISTS Production RC plane reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBiMc4pCYMAjhMyTs4CE3kfu Scratch builds - https://www.youtube.com/playlist?list=PLC8MdCMvxwBjCFK185XHZktPHO9FF6YH9 Maiden flights - https://www.youtube.com/playlist?list=PLC8MdCMvxwBiPrqZmt-8LJdt6iUbuZDmM Action cam reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBg_ehUxf15mkpLyKV38UBPe FPV gear reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgZZEAtmmS3ctbHzNY_tfZO OpenTX and Taranis - https://www.youtube.com/playlist?list=PLC8MdCMvxwBh_Pkp1EkLilgWcK8CQINd9 FlySky Turnigy i6 and i6s - https://www.youtube.com/playlist?list=PLC8MdCMvxwBg-OAlBiYWuDSBSpyFMFhy5 Past Planes long term reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgC5XiMDGDr5-KsCy0L0Qas Underwater - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhXZO-MJveeYXp8Dky6uQr9 Timelapse - https://www.youtube.com/playlist?list=PL757CC70F1DE5699D Plane mashups - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgHMbTcWre1z4DVrUqRH2t4 Hotwire airfoil cutting - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhQByf_3Emcb0bSah1tv5dE RC cars, boats and land yachts - https://www.youtube.com/playlist?list=PL5D330C595697FED0 Kites and KAP - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhkO8qEAbF5riuc1KbRq9dL AZOR Dutch bikes - https://www.youtube.com/playlist?list=PL017571716D90C701 MATERIAL Links Knauf XPS insulation foam - http://www.bunnings.com.au/our-range/building-hardware/building-construction/insulation/panels Hotwire template material - http://www.bunnings.com.au/consolidated-alloys-150-x-0-3mm-x-10m-weatherflash_p1100453 Bulk Depron - http://www.tradewarehouse.com.au/more/depron-foam/white.html Skyshark P4X spars - http://www.kitesandfunthings.com/ProductInfo.aspx?productid=SSP4XCAM0 New Stuff iron-on film - EZload laminate - http://www.neopostonline.com.au/lamination/ez-load-roll-film Blank ID cards - Ebay - Search for CR80 Blank ID cards Close-up glasses - goo.gl/fyOGnG
Просмотров: 10532 Andrew Newton
Cardboard wing made from the box that the Volantex Ranger G2 came in. Using Flite Test plans for the mini Arrow - https://www.flitetest.com/articles/flying-wing-made-from-a-cardboard-pizza-box Volantex Ranger G2 box (with bonus G2 plane and Boxler kit) - https://bit.ly/2wVXJj6 Ranger-Box wing flying weight with 1300mAH 3S - 400g CG - 160mm back from nose 2205 2300kV motor 5x4 prop 18A ESC Website links Newton Airlines Uncut - https://www.youtube.com/channel/UCuFf6eTdoSVa6VMlu_0smjA Newton Airlines blog - http://newtonairlines.blogspot.com.au Andrew Newton YouTube - https://www.youtube.com/channel/UC2QTy9BHei7SbeBRq59V66Q My portal - http://anewton.net More information iNAV fixed wing tips - http://newtonairlines.blogspot.com.au/search/label/iNav What HD cameras do I use - http://newtonairlines.blogspot.com.au/2017/07/what-cameras-do-i-use.html What FPV cameras do I use - http://newtonairlines.blogspot.com.au/2017/07/what-fpv-cameras-do-i-use.html What FPV gear do I use - https://newtonairlines.blogspot.com.au/2018/02/my-fpv-rig.html Building materials and RC gear - http://newtonairlines.blogspot.com.au/2015/03/materials-and-links.html Depron Armin Wing build - https://www.youtube.com/watch?v=h_RzXO5u3M0 VIDEO PLAYLISTS Production RC plane reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBiMc4pCYMAjhMyTs4CE3kfu Scratch builds - https://www.youtube.com/playlist?list=PLC8MdCMvxwBjCFK185XHZktPHO9FF6YH9 Maiden flights - https://www.youtube.com/playlist?list=PLC8MdCMvxwBiPrqZmt-8LJdt6iUbuZDmM Action cam reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBg_ehUxf15mkpLyKV38UBPe FPV gear reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgZZEAtmmS3ctbHzNY_tfZO OpenTX and Taranis - https://www.youtube.com/playlist?list=PLC8MdCMvxwBh_Pkp1EkLilgWcK8CQINd9 Programming Mixes - https://www.youtube.com/playlist?list=PLC8MdCMvxwBiJZjE0VPjBJoMFWNaPz-0t FlySky Turnigy i6 and i6s - https://www.youtube.com/playlist?list=PLC8MdCMvxwBg-OAlBiYWuDSBSpyFMFhy5 Past Planes long term reviews - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgC5XiMDGDr5-KsCy0L0Qas Underwater - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhXZO-MJveeYXp8Dky6uQr9 Timelapse - https://www.youtube.com/playlist?list=PL757CC70F1DE5699D Plane mashups - https://www.youtube.com/playlist?list=PLC8MdCMvxwBgHMbTcWre1z4DVrUqRH2t4 Hotwire airfoil cutting - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhQByf_3Emcb0bSah1tv5dE RC cars, boats and land yachts - https://www.youtube.com/playlist?list=PL5D330C595697FED0 Kites and KAP - https://www.youtube.com/playlist?list=PLC8MdCMvxwBhkO8qEAbF5riuc1KbRq9dL AZOR Dutch bikes - https://www.youtube.com/playlist?list=PL017571716D90C701 MATERIAL Links Knauf XPS insulation foam - http://www.bunnings.com.au/our-range/building-hardware/building-construction/insulation/panels Hotwire template material - http://www.bunnings.com.au/consolidated-alloys-150-x-0-3mm-x-10m-weatherflash_p1100453 Bulk Depron - http://www.tradewarehouse.com.au/more/depron-foam/white.html Skyshark P4X spars - http://www.kitesandfunthings.com/ProductInfo.aspx?productid=SSP4XCAM0 New Stuff iron-on film - EZload laminate - http://www.neopostonline.com.au/lamination/ez-load-roll-film Blank ID cards - Ebay - Search for CR80 Blank ID cards Close-up glasses - goo.gl/fyOGnG Cameras Cameras and mounts - https://www.youtube.com/watch?v=DaskJyx0FbY Cameras on planes - https://www.youtube.com/watch?v=mrcQZKHNMNg
Просмотров: 4009 Andrew Newton
Quick build and flight video of a simple RC flying wing with pusher prop design based on the simplicity flying wing scaled down for a 1s LiPo power system. Wing span is 46 cm and length of fuselage is 35 cm. CG is 16 cm back from the tip of the nose. You can get plans for the larger 2s LiPo version here: https://www.sarikhobbies.com/product/simplicity/ Page from magazine: https://library.modelaviation.com/system/files/styles/zoom1374/private/ma/ma201104/ma201104_084.jpg Power system and part numbers are the same as this video: https://www.youtube.com/watch?v=ADSzZpGcs8Q
Просмотров: 64628 Dave Merc Productions
Build of a Solar powered RC controlled flying Wing that is completely self sufficient with a build in Autopilot and Camera equipment. Solar Impulse on a smaller scale ;) Record flight [6 hour 200km] https://www.youtube.com/watch?v=KHV-RjvTb1c Albatros XXL: http://www.kuestenflieger.de/modelle/albatros/index.html Setup: Photovoltaic Cells: 30x Sunpower C60 125x125mm (max ETA: 22,5%) Solar cell surface: 0,467m² Autopilot: Ardupilot 2.5 with Arduplane FW Ublox GPS Airspeed-Sensor Voltage/Current Meter RC: EzUHF 4ch RC-Rx FPV: Mini 90° Live Cam Minimosd Drive: Brushless DC Motor: 4220 650kv Hobbywing X-Rotor ESC - 20amp Carbon folding propeller 11x10’’ 4S3,6Ah 30C SLS Lipo
Просмотров: 333079 Prometreus
PLEASE LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR CHANNEL TBOBBORAP1 AND FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR HD QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT - https://www.facebook.com/pages/Tbobbo... https://twitter.com/TBOBBORAP1 https://www.youtube.com/user/tbobborap1 TIM UP TO HIS TRICKS AGAIN WITH HIS OWN DESIGN (I THINK) FLYING WING WITH WHAT LOOKS LIKE A ZENOAH 26cc PETROL UP FRONT ? UNFORTUNATELY BOTH WHEELS FELL OFF IN FLIGHT AND THE MOTOR CUT SO TIM MADE AN UNUSUAL LANDING WITH HER - LOL, FILMED AT NLMFC BALDOCK ON 1-3-14, CHECK OUT THE RAPID EYEWEAR WEBBSITE OF THE SUN GLASSES DEANO WEARS - http://www.rapideyewear.co.uk/
Просмотров: 5063 tbobborap1
I demonstrated in the previous video called "Two Dollar Radio Control Flying Wing Breaks 70 mph", just how fast and agile this flying wing is. It is the best flying plane I have built to date for any price and the best part is that the plane will cost you less than two dollars to build once you've purchased the electronics. This means you can "Fly It Like You Stole It" because you don't have to worry about loosing a $100+ investment. If you destroy the plane, just build another for two dollars and less than two hours of your time. In all the wings I have crashed so far (which has been quite numerous as I have perfected this design), I have only broken one $4 servo. Every time I crash one, I simply pull the parts from the broken plane and transfer them to a new one, trimming the glue off the pieces I am transferring before I install them on the new one. It is quick and easy and refreshingly painless to do. No more fretting and crying over the loss of your plane and lots and lots of dollars. This hobby can be cheap and more fun, because I have taken all the pain away. Also you will find you will soon fly this wing better than any plane you have ever had because you will take risks with it you would never take with a $100+ plane. You will do rolls and pull them out only inches from the ground. You will do inverts right off the ground and cut your plane the right and left full throttle and again, only feet or inches from the ground. No worries. No fear. More fun. Enjoy. I realized my listing of parts is not to clear in the video, so I will post a complete parts list for both configurations you can download form my website at WhaleSnail.com on the bottom of the page called "Photo Gallery". Just hit the second button from left at the top of the home page screen and scroll down to the bottom and you will see the three page template of the wing you need to download and which I show you how to download in the video and then download the two parts lists in the same way. Good Luck and Have Fun. I had a few questions about the Center of Gravity. The Center of Gravity, where the plane should balance, is 135 to 142 mm back from the tip of the nose.
Просмотров: 112046 William Whale
Learn to build a swappable Delta wing! This Delta is designed for taking that next step in your RC flying offering the ability to do rolls, loops, inverted flight and more! The third installment in the swappable airframes series is this Delta wing, designed with a unique KF airfoil step design. The KF step on this Delta is created with a folding technique that will offer for a clean scratch built design! Build plans and more details on our website here: http://flitetest.com/articles/DeltaScratchBuild See the Delta wing in action here: http://www.youtube.com/watch?v=LV_0QuBuIBM
Просмотров: 391054 FliteTest
To see this plane fly go here: https://www.youtube.com/watch?v=0dk2lgGdHAA This is a step by step build video for a fun and challenging high performance mini delta wing. It has nearly unlimited vertical and can roll and flip very fast. The video thoroughly details the entire build process including the materials and measurements. I will be including a bill of materials and a list of where I bought the parts and materials. I can also provide drawings and CAD files.
Просмотров: 130144 jjmonns
H-KING BONSAI II EPP FPV RC flying wing: ESSENTIAL RC FLIGHT TEST AVAILABLE HERE (BLUE): https://goo.gl/UCLkFX AVAILABLE HERE (ORANGE): https://goo.gl/cwhKMd AVAILABLE HERE (YELLOW): https://goo.gl/P8iBqb The Bonsai is known for its excellent flight capability and it's one of the reasons they are so popular. You can trickle along at walking pace, fly aerobatic or just see exactly how low 'n' fast you can get away with! The H-King Bonsai II combat wing is made of almost unbreakable EPP foam and comes in a ready to fly configuration. Just add a receiver and battery and go flying. It is set up with mountains of power and performance and will have you screaming in no time. As the Bonsai II comes in three colors you and your flying buddies can choose a different color and have hours of fun ripping up the sky with some high adrenalin combat flying safe in the knowledge that when the inevitable happens, you can fix it in double quick time! Add your FPV gear for some extreme, terrifyingly fast, combat action or just a lazy flight around your field. The Bonsai II will meet all your flying requirement and is cheap and easy to build. Get yours now!!! Filmed by Dom Mitchell for the 'Essential RC' YouTube channel using the Panasonic AG-UX180 4K camcorder. Model flown by Al. Don't forget to subscribe for regular 'Essential RC' action using this link http://www.youtube.com/c/EssentialRC?sub_confirmation=1 News, Reviews and Regular FREE Giveaways at https://www.facebook.com/groups/essentialRC If you enjoy Essential RC then please consider contributing to the improvement of our future projects by visiting http://www.patreon.com/EssentialRC
Просмотров: 4952 Essential RC
Todays plane is really awesome! It is the DS(Dead Simple) 24 from RCGroups(http://www.rcgroups.com/forums/showthread.php?1252282-24-DS-(Dead-Simple)-Flying-Wing-Pics-Video-Plans). This wing is only has a wingspan of 24" but it utilizes a KFM2 airfoil for some moderate lift. Because I used foam board with the paper on, the wing requires no sparring and is surprisingly stiff. I was REALLY amazed at how well this plane flys. I almost don't want to take it apart to build my 5th plane. ATTENTION ALL RC CANADIANSI This wing only weighs 230g with a 800 3s battery and an AIO fpv camera, making it a great candidate for FPV under 250g.
Просмотров: 29385 Lord of the Wings
Built using 2mm depron foam using the electronics from the hobbyzone champ with elevon mixing. 8mm motor with direct drive 2.5mm prop and KF air foil. This is a fun plane to fly. foamconceptjets.com
Просмотров: 186173 Chris Allen
Build an easy great flying Combat Wing out of Corrogated Plastic (yard sign material). The build portion of this video is sped up 7x. I walk you (quickly) through the steps to get this airplane built. Also included in the video: 1) Two parts lists, one for dosile flight and one that will build a real screamer. 2) Plans with dimensions for the build. The CG is about 8 1/2 - 9 inches back from the nose (right around where the prop would be).
Просмотров: 22894 UnlimitedVertical
We join the crew at the Dallas FPV Wing Club in Texas and fly some wings! http://flitetest.com/articles/texas-flying-wing-weekend Learn more about the Dallas FPV Wing Club: http://dfwc.club See more BMSweb https://www.youtube.com/user/BMSWEB Thanks again to Shane and Heather, everyone at the Dallas FPV Wing Club and DFW RC Flyers! DFW RC Flyers https://www.facebook.com/groups/dfwrcflyers Full writeup and more details here: http://flitetest.com/articles/texas-flying-wing-weekend .
Просмотров: 88144 FliteTest
Building flying wing from one sheet foam board more information is here http://flitetest.com/articles/flying-wing-from-one-sheet-foam-board I created this video with the YouTube Video Editor (http://www.youtube.com/editor)
Просмотров: 114111 Kartiko Nugroho
Updated description as of 2018: I have lost track of this plane, I think I gave it to a friend or something. I never really got the electronics for it and it would have been to heavy to fly anyway.
Просмотров: 12782 Oskar RC
Howdy this is the COMPLETE build video of the DW HOBBY Rainbow Flying Wing V1 bought from Banggood.com here http://bit.lc/3Vdr. ALL the parts used during this build are listed below, press the SHOW MORE button to see them. As you can tell from the video above, I love flying wings and this one when flown with a light 2S setup is brillant fun. It glides forever and you can do pretty anything with her. Happy days! The maiden of this new wing will be up on YouTube in a couple of days, I need the weather to calm down a bit first here in the UK. MODEL: DW HOBBY Rainbow 800mm Wingspan EPP Flying Wing RC Airplane KIT http://bit.lc/3Vdr HOT GLUE GUN: This little glue gun is brilliant! It's super cheap and takes 7.1mm glue sticks: https://goo.gl/bFPRqU SERVO TESTER: If you don't have one of these, they come in super handy to check on servos before putting them into your models and of course centering them too https://goo.gl/sa0hPw CONTROL HORNS: As mentioned in the build video of the flying wing, the control horns that come with the model aren't really any good, so instead I used these ones https://goo.gl/ogkRhV which are miles, miles better. CARBON FIBER RODS: I get through soooo much of this stuff in my models https://goo.gl/M4fwxP. One small slit with the craft knife, run an end of the rod through, add glue and push in the length of the carbon rod or instant, lightweight support. CRAFT KNIFE SET: I can't remember where I got my knife set from, but this set https://goo.gl/S2p3Yc is similar. BLUE LOCKTITE: The threadlock comes in two forms, red & blue. Red is permanent and the blue stuff is semi-permanent so you stand a chance of getting the screw back out later. So you want the blue stuff! MOTOR: I use this motor in my baby bonsai flying wing and it's proven to be able to take a complete beating over time https://goo.gl/NDSqsI. It's designed for 2S batteries (which is perfect for this flying wing), I have run it on 3S for say 40 flights and while it still works, it's showing signs that I have pushed it too hard. So keep it to 2S batteries unless you're prepared to treat motors as consumables ;-) PROP ADAPTER: The prop saver that comes with the EMAX CF2812 motor is pants, I've never broken a prop yet with a flying wing, so with that in mind grab one of these https://goo.gl/ODsWgp for about a quid ($2 USD) SERVOS: I use the TowerPro MG90S servos in all my smaller models and they ROCK! They're cheaper than the cheap HobbyKing plastic geared ones. They have more torque and have metal gears https://goo.gl/6M7XDR Note: See this video for more details https://www.youtube.com/watch?v=HQNQgOYffWo about the Tower Pro servos. RECEIVER: I'm using FrSKY, so using a V8R4-II receiver https://goo.gl/PZZNvT is a no-brainer because it's light, cheap and has 4 channels. We only need 3 for this model, so a great choice. TRANSMITTER: Always the Taranis https://goo.gl/3BRI0s, by far the best transmitter around for the money. If you're on a budget, then this one https://goo.gl/FCBQw7 (FlySky FS-i6) is miles cheaper and basically does the same thing. FPV AIO CAMERA: If you'd like to fly this wing FPV stlyeeee! Then the Eachine MC01 is a brilliant little camera to use https://goo.gl/amyuOW. Note: Do not go for the Eachine MC02 AIO FPV camera, see this video for why https://www.youtube.com/watch?v=WTSaq6GKOE4 SUGGESTED BATTERY: I'm using a 2s 1000mAh Zippy pack because thats what I have loads of, but to be honest it's a bit big for the model. A battery like this one https://goo.gl/KVBF8y (JST connector) would be more suitable and fit more nicely. As always thanks for watching & happy flying, Matt, --- WANT MORE VIDEOS LIKE THIS ONE? --- Subscribe here for the LATEST updates: http://www.youtube.com/subscription_center?add_user=moggiex For more videos like this one, see my YouTube Channel here: https://www.youtube.com/user/moggiex/ Would you like to SEE THE NEW VIDEO'S BEFORE they're published on YouTube? --- I post the videos in the FaceBalls group BEFORE they go live on YouTube. You can join the group here: https://www.facebook.com/groups/ragthenutsoff/
Просмотров: 10083 RagTheNutsOff
First flight of the SSD, "Simplest Simple Delta" flying wing. I was nervous about flying an elevon control airplane but my fears were unfounded. It's a great elevon trainer. Not twitchy at all. It's made from foam poster board with the paper left on. If it crashes, no big deal. It only takes a couple of hours to build. Not my design, though I made a few changes to the original. I put the motor up front and added landing gear. Plans and instructions are at: https://www.rcgroups.com/forums/showthread.php?t=2145562 Thanks to "Balsa or Carbon" on RCGroups.com for the original. Motor: BE1806-2300KV Prop: 6x4 Battery: 850mAh 3S Radio: FlySky FS-i6
Просмотров: 30912 toojung2die
Tim Got maiden his "Hundo" a 100 inch wingspan flying delta wing. Made wth EPP Foam. Equipped with all the fixed wing luxury including Flaps, Rudder and multiple camera setup. With the Video Splitter Tim is able check his surroundings and keep tabs on the whole squadron. This aircraft is carrying full FPV gear, 3 cameras, Full vector OSD system and 12,000 Mah of 6s Lipos. This plane takes off really smooth 1:2 thrust ratio and massive power to the 15 inch prop. It is also incredibly smooth and stable with the very heavy payload. We feel this plane flying well below its capabilities. For more info or to purchase Wing kits, Check out www.TeamLegit.com
Просмотров: 70382 Team Legit
It really felt like the first day of summer (at long last) here in Tokoroa so Richard and I decided to have a bout with our $10 combat wings. Great fun -- although we were regularly interrupted by a full-sized (microlight) aircraft that seemed to be having difficulties coping with the conditions. If anyone wants the plans for these combat wings, let me know. They're easy-peasy to build and a lot of fun to fly. Mine has a GMS32 in it and Richard's has an ASP28 (a sub-$50 engine).
Просмотров: 13456 xjet
In this video I will show you how you can build a flying wing under 250 grams. I am using a TBRC Apex 28" in most of this video. The white airplane is VAS Sphinx which can be built under 250 grams the same way. I decided to build the Sphinx up as a race plane and the TBRC as an ultra-light. The Apex is literally 1/3 the weight a normal FPV flying wing of its size would normally be.
Просмотров: 15542 Video Aerial Systems
This is a first! Flat foam board RC wings flying combat at Dave's Beach in Carlsbad, CA. There's four of these FLYTRAP flat foam wings in the air, Rich, Ray, Chris and Troy and Kenny flying his Kato wing (the RED wing with green and white bottom). Gary sat out and took it all in on my iphone. We spent 6 hours in the air this day. So much darn fun! There was pleanty of foam carnage :) Build your own FLYTRAP! Plans avaialble for FREE on rcgroups. http://www.rcgroups.com/forums/showthread.php?t=2164254
Просмотров: 2741 Troy Churchill
Thank you for watching "Zagi making" video. Video shot and edited by Huseyin Ozkan Music : Mozart This video included 100cm zagi... More detail about 120cm Zagi please visit : http://www.rcturka.com/cicoz120-kitden-cicoz120-yapalim-451.html If you need a CG Calculator : http://www.rcturka.com/model-ucak-zagi-agirlik-merkezi-hesaplama-cg.html
Просмотров: 109773 RCTURKA
This is a great handling, fun, cheap, and pretty fast DIY scratch build wing. Once you fly it, you'll want two more! Here's the build video I followed to build the plane. I made some slight modifications from this version, but it's pretty much the same plane. http://www.youtube.com/watch?v=lpjzNjn7ynw Original plans - http://www.intensewalkera.webspace.virginmedia.com/public/PLANS/SCHRAUT5%20FLYING%20WING/schraut5%20flying%20wing%20980mm.html
Просмотров: 25515 hadaller
This video is about the time when I ventured into the dangerous waters of engineering. It was pretty neat I guess. Endurance Record Flight: https:https://www.youtube.com/watch?v=IhEL0IVXaYo Oh Nathan, the stability guy has a youtube channel, I'll link it here : https://www.youtube.com/user/TheGospelMegaphone A viewer shared a video flying a scaled up version: https://youtu.be/fpoMi3v-i7c This video has been on the back burner for almost a year now, I just spent a solid several days working on this. Now to catch up on my homework. To see what I'm up to as it happens, follow me on https://www.instagram.com/sammsheperd/ If you feel like it supporting: https://www.patreon.com/samm_sheperd?... for monthly support https://www.youtube.com/nessfultude22 has fan funding enabled on the right side of the page Paypal email: firstname.lastname@example.org Thank you Patreon supporters! Stann Sheperd Janette Zachary Ennenga Jeremiah White Austin Hooper Mason Bially MKme Lab
Просмотров: 637813 Samm Sheperd
I removed the first part of the music because it was claimed by somebody! 1:9 scale x-wing RC airplane made of 5 mm depron and some balsa wood servos : 9g motors :2800 kv ESC :60AMP 4s 7ch spektrum receiver all lights are LED 12v. 3D drawing https://grabcad.com/library/x-wing-fighter-star-wars check out my facebook page to see more pictures : https://goo.gl/yCqrSQ follow me on Instagram : https://goo.gl/DeeA7e and don't forget to subscribe Subscribe here 😃 ➡https://goo.gl/1BpZM6 ⬇️my affiliate websites⬇️ Banggood.com :https://goo.gl/HLEn9f amazon.com : http://amzn.to/2enXYpm amazon.de : http://amzn.to/2f0Slz4 Ebay DE https://goo.gl/1SknXh if you buy some RC parts or anything from these links you'll support me with some points :D so thanks for your support 😊 /
Просмотров: 31714 Ramy RC
This is just some raw footage of a dead simple to build RC Slope Glider. Light wind conditions for the first flight, 2-3mph. It's almost silly how fast you can get this wing in the air... Made from a single sheet of 6mm depron (FFF or DTF would work too). Scratch built about 2 hours before this video was made. It caused quite a stir at the slope because when there are more than one of these in the air, you will have too much fun and that seems to irritate other pilots. So Stephan (the videographer or more appropriately, iPhone operator) named it the "Instigator". PLAN: AUW: 3.5oz-5.0oz WINGSPAN: 33: Root Chord: 11" TIPS: 4" Elevons: 2" SPAR: No need Packing tape over LE GEAR: Servos: 5 gram Batt: 1s LIPO 600mAh RX: micro 2.4ghz Spektrum Pushrods: 0.039" music wire BUILD THREAD and Plans for the Instigator Located here; https://www.rcgroups.com/forums/showthread.php?3123049-Don-t-Build-This-Wing%21
Просмотров: 522 Troy Churchill
This is my attempt to design and build my own flying wing. I wanted to build a small, portable size wing that would be easy and fun to fly. I used XFLR5 analysis tool to verify my vision (I'm not an expert user). The wing came out very light and also very wobbly. I used packing tape and 3x1mm carbon fiber spars to stiffen it, but it fluttered like crazy at certain AoA. Apart from flutter, the wing flew pretty well. It glided well and it was stable. I could hover it at 50% power. Just what I was trying to achieve. Part two, with improved wing: https://www.youtube.com/watch?v=7bB2NWsrfWc Dimensions: Span: 1200mm Root chord: 150mm Tip chord: 100mm Winglets: 80mm high Sweep angle: 30º Electronics: Cobra 1960kv 5030 x three blade prop 800mAh 3S battery 12A Blue series ESC 2x 4.3g HD-1440a servos XFLR5 http://www.xflr5.com/xflr5.htm "Odyssey" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
Просмотров: 70036 Antti Vainik
This is my flying wing using KFM airfoil scratch build. This is my first attempt of flying a wing and building it. Please use following affiliate links for purchasing parts. Using this links, you will support my channel and keep me going. Parts list - Transmitter & Receiver - https://goo.gl/671Vcw Banggood website - https://goo.gl/NsjKkg Motor - https://goo.gl/wBqg46 ESC - https://goo.gl/wcEjCd More such videos are coming soon. So consider subscribing.
Просмотров: 862 Amit Wagh Photography
BANGGOOD purchase link - http://bit.ly/2tzOJhq BANGGOOD website - http://bit.ly/2rXcheK BANGGOOD RC - http://bit.ly/2rXaXIx 1030mm wingspan FPV racing wing with CF fuselage and EPO wings. Magnet wing retaining system. This is a very nice, fast and smooth wing. Tilt tray for the HD camera. Newton Airlines blog - http://newtonairlines.blogspot.com.au Website - http://anewton.net Andrew Newton YouTube - https://www.youtube.com/channel/UC2QTy9BHei7SbeBRq59V66Q Newton Airlines Uncut - https://www.youtube.com/channel/UCuFf6eTdoSVa6VMlu_0smjA Description: Brand Name: Eachine Item Name: Fury Wing Wingspan: 1030mm/40.55in Length: 396mm/15.59in Color: White Material: Carbon Fiber Fuselage + EPO Wing CG: 12.5cm from the wing leading edge(There is a convex point under the wing,that is the CG) ESC: 40A 3-4s with XT60 connector Motor: Racerstar 2216 2000KV Motor Weight: about 66g Motor Shaft Diameter: 6mm Propeller: 6x4.5 Servos: 2pcsx 9g digital servo Flying speed: 20-180+km/h Compatible cameras: Gopro Session, FOXEER HS1177, Runcam2 HD/Runcam3 HD Recommended Parts For This Item(Not Included): Recommended Battery: 3S-4S 2200mAh 25C, Click Here Balance Charger: SkyRC charger, Click Here Radio System: 2.4G 6CH, Click Here Image Transmission Device: Eachine TS832 RC832 set, Click Here Recommended Video Camera: Runcam2 HD, Click Here Recommended FPV Lens: 600TVL 2.8mm Lens, Click Here Features: Full carbon fiber fuselage, not Glass Fiber material, this is durable and rigid. EPO molded wing, pre-built-in Carbon Fiber spar for enhancement, light and flexible plus crash resistence. Detachable wing and wingtip for easy transport, and easy to change wing by simple plug. Mainwing connected to fuselage by strong magnets, will be disconnect and release during crash. Powerful 2206 2000KV Brushless Motor, 40A ESC,servos are all pre-installed for your convenience. Motor mount can be moved forward or backward to adjust CG. Multiple camera mount, compatible for FPV camera (FOXEER HS1177) and HD Camera(Gopro Session or Runcam2 HD/Runcam3 HD). Well protect for your FPV gear and RC components. With 2 skids for hand launch grip and landing.
Просмотров: 15696 Andrew Newton
Flying wings are definitely more twitchy than conventional or canard designs, but this video has a few build tips that make flying them manageable. I wanted to try it out to see what the Kfm3 airfoil would do and check out this whole elevon delta wing build and fly experience (I usually use "real" airfoils). While it was fun for experimentation and the thing is flyable, I definitely prefer my slow-flying/tight-looping twin boom pusher. Landing this flying wing thing is considerably more challenging (you need to keep approach speed pretty high).
Просмотров: 2835 Natan Abrams
Here's Quadshot Chris flying his scratch built 2oz Flying Wing made from 3mm depron flat foam using the new KFH (Kline Fogleman Hybrid) arifoil developed for the 48" Flyrtrap RC wing. You can build your own for around $20. Check the Flytrap thread on rcgroups.com http://www.rcgroups.com/forums/showthread.php?t=2164254
Просмотров: 1414 Troy Churchill
Here is my version of a Zagi, cut out of foam from home depot, using an Axi 2212/12 brushless motor, and a 30amp speed control on a 2 cell battery lipo spinning a 8x6 prop. I used the KFm2 airfoil by Kline Fogleman and as you can see, a beautiful flight characteristics and speed. Visit http://www.skyhighhobby.com for the free plans of this plane
Просмотров: 3584 wickedinsight