На главную
Результаты поиска “Bed frame angle iron end caps”
Welding a Bed Frame Until it is a Tool Stand
 
09:41
I converted an old bed frame into a tool stand for my chop saw. The bedframe was a thick gauge 1.5 inch angle iron that made for a very sturdy stand.
Просмотров: 6125 Measure Once
🔥 Tips for Welding Square Tubing
 
10:24
►SUBSCRIBE for new videos every Monday and Friday: https://goo.gl/FRdNss Today we're going to show you some tips and tricks that will help you weld square tubing. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ VIDEO SCHEDULE: ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ► MIG Monday: New Videos every Monday! ► TIG Time: New Videos every Friday! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ EQUIPMENT WE USE: ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ► ArcOne Helmets: www.arc1weldsafe.com ► CK Worldwide - www.ckworldwide.com ► Steiner Industries - www.steinerindustries.com ► West Chester Gear - www.westchestergear.com ► Tab and Slot Welding Tables: www.tabandslot.com ► Philips Welding Lenses (for Filming): www.phillips-safety.com/ ► ESAB Power Sources: www.ESAB.com ► Everlast Power Sources - www.everlastgenerators.com ► AHP Power Sources - www.ahp.com ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ JOIN US ON: ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ► FACEBOOK : https://www.facebook.com/welddotcom ► INSTAGRAM : https://www.instagram.com/welddotcom/ ► FORUM : https://www.instagram.com/welddotcom/ ► TWITTER : https://twitter.com/welddotcom ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Просмотров: 427622 Weld.com
Fabricating 101: How To Notch and "Cope" Angle for the Perfect 90 Degree Fitup
 
03:14
Buy A Must Have For ANY Welder/Fabricator, Here: http://amzn.to/2gj5A2o There are two common ways to get a good 90 degree fitup when working with angle "Iron", you can either miter each piece 45 degrees, or "notch" your steel and weld it up. This video gives a few tips on the second method... Interested in A Career In Welding? Click Here: http://www.georgiatradeschool.com/ ChuckE2009 Facebook Page: https://www.facebook.com/pages/ChuckE2009/282164941819994
Просмотров: 230785 ChuckE2009
Square Tubing Tip
 
05:31
easy tip for welding square tubing when they have to fit inside eachother.
Просмотров: 1244851 Stephen Marchio
How to assemble a keyhole adjustable bed frame
 
03:20
http://customcomfortmattress.com/ How to assemble a keyhole adjustable bed frame Hey everyone its Demian ross with custom comfort mattress today i'm going to show you how to assemble a keyhole adjustable bed frame for a queen size bed. So you have all of your pieces laid out, you're going to have five metal rails, you're going to have four wheels two glides and two plastic end caps. So one make sure you have all of the pieces necessary. The first thing you're going to want to do is grab the side rails, the side rails are going to be the longest pieces you have and they'll have these two arms that will extend into ninety degree angles what you want to look for is the headboard bracket, there will be a headboard bracket on one side there is no bracket on the other this is where our plastic end caps are going to go. And this is where the head of the bed is. So i'm going to lay this out first here, I'm going to grab the other side rail. Same thing i'm just gonna let them extend out to a ninety degree. The headboard bracket is here again so i'm going to put it there. Why don't we take a quick second and put on the plastic end caps. So you have these two pieces here they just look like little L pieces of plastic. We just want to slide them over the end here. The plastic end caps I just put on are going to protect your skin if you ever kick into it and they are also going to protect your walls, and protect your mattress. So lets talk about the other pieces we have left. We have the center support beam here its great that its upside down it'll make it easier to put the glides. And we have a head beam and a foot beam now they are both exactly the same. So it doesn't matter which one goes where. Im gonna lay those out on the end here and the other piece here. Now we have four wheels and two glides. So lets go ahead and separate and grab the two glides. We have these two pieces here and those go into the center support so lets just go ahead and put those in put a little pressure. Now we have four wheels. Each wheel will go on a corner. I'll start here and basically just lift up the frame there is a small hole and just pop it into place *errgh *phew Alright this is what i'd consider to be the trickiest part of assembling this frame. what you want to do is grab the center support and in this case i'm grabbing the foot rail and you'll see there are two little notches on the inside of the foot rail and your basically sliding at like a one hundred and eighty degree angle and then bring it back to a ninety degree angle and it locks into play. Then you can go ahead and now put the glides so they are facing down. This is where all the key locks are and we are going to use the furthest hole for a queen size. So the furthest peg into the furthest hole spin and lock it in place. Same thing here furthest hole lock it in place. If your going to need to set up an eastern king or a cal king your instructions which notches to use. Lets continue go ahead and continue to do this. Now this is down, same thing we have the two notches we are sliding it into play spinning it looking for the furthest hole, locking that into place, looking for the furthest hole, locking it into place. And there is your keyhole adjustable bed frame set up for a queen size bed. I hope this helped you out, if you have any other questions, you can feel free to email us. And I thank you for watching.
Просмотров: 249523 Custom Comfort Mattress
Square Tube End Caps
 
10:26
For 1 inch Square Tube with 2/16 inch wall - End Caps You can find the thing file to print it yourself here: https://www.thingiverse.com/EvolHub
Просмотров: 97 EvolHub
Home Metal-Shop Tips 101: 6 Easy Ways How To Cut Metal
 
07:07
Watch as Mitchell Dillman, "the Online carpenter" at http://logfurniturehowto.com/article/7-easy-ways-how-to-cut-metal/ ,demonstrates 6 easy ways how to cut metal in your Home Metal-Shop. In this video Mitchell covers these 6 metal cutting tools: 1. Angle Grinder 2. Abrasive Cut-Off Saw 3. Metal Cutting Band-Saw 4. Tin Snips 5. Electric Metal Shears 6. Oxy-Acetylene Torch And remember, it doesn't matter what you are cutting, your eyes are one of the most important tools you have. ALWAYS WEAR EYE PROTECTION! Now, click "Subscribe" and Go To: http://logfurniturehowto.com/tool-box/power-tools/
Просмотров: 605300 Mitchell Dillman
Mig Welding - Square Tubing
 
07:23
Click on the link below to view my latest video on MIG Welding - Square Tubing: http://youtu.be/8NUFYGE4Lug In this video I am going to be discussing MIG Welding square tubing by introducing you to the types of welds involved, and demonstrating how they are produced. I hope you will enjoy the video, and if so, please hit the "Like" button after watching. Also, don't forget to subscribe to my YouTube Channel so you can be updated whenever I post a new video. Take Care, Dan
Просмотров: 2417233 WeldFever
How to Make a Sofa Bed
 
18:28
How to make a multi-functional SOFA that turns into a CHAISE LONG, a BED, has STORAGE underneath and even a COFFEE TABLE! Portuguese and english subtitles available! Plans available at https://www.patreon.com/posts/8355571 Rockler products used on this project: Dowel Drilling Jig Kit - http://bit.ly/2fAsOfE Tapered Bit/Countersink - http://bit.ly/2mi4BzU Aluminum Bar Clamps - http://bit.ly/2g9uEIJ T-Track Table Top - http://bit.ly/1m6RwCD Shop Stand - http://bit.ly/2aKTIlY Wooden Handscrew Clamps - http://bit.ly/1yuHDSL GET 15% DISCOUNT on any mask from RZ MASK using the Code GETHANDSDIRTY https://rzmask.com/ I've been using the M2 Mesh Masks and love them. Very convenient, comfortable and so easy to put on and off with the velcro strap. Don't forget to click on the Bell icon near the Subscription button so you always get notified when a new video comes up! Patreon https://www.patreon.com/gethandsdirty Get T-shirts and stickers http://gethandsdirty.com/shop/ Social media Instagram https://instagram.com/gethandsdirty Facebook https://www.facebook.com/GetHandsDirty Twitter https://twitter.com/GetHandsDirty Here's my PO Box if you want to send a letter Cristiana Felgueiras Apartado 43 Batalha - Porto 4031 - 401 Porto Portugal
Просмотров: 3357226 Get Hands Dirty
How to Build a Metal Carport - Part 1
 
07:45
Thank you to Lincoln Electric for sponsoring this video: https://goo.gl/6lgO33 Check out Part 2 here https://youtu.be/RYN0dCDRh5o For a written tutorial check out my blog at https://www.wilkerdos.com/ Patreon: https://www.patreon.com/user?u=257047 Instagram: https://www.instagram.com/wilker_dos/ Website: http://wilkerdos.com/ Check out my awesome sponsor Triton Tools! http://www.tritontools.com/en-US Things I Used in This Project: Blue tooth Headphones: https://goo.gl/PVbExl Welder: https://goo.gl/wFwhP9 Plasma Cutter: https://goo.gl/Bf6kWM Welding Cart: https://goo.gl/ym9ku1 Welding Hood: https://goo.gl/RU5mxM Jacket: https://goo.gl/5girBV Gloves: https://goo.gl/lvdt1M Line Level: https://goo.gl/2LK73g Tinted Safety Glasses: https://goo.gl/OzvBAv Magnets: https://goo.gl/H0uNWV Chop Saw: https://goo.gl/7vEcqN Metal Marking Pencil: https://goo.gl/JNovUw
Просмотров: 1604928 April Wilkerson
Truck Canopy Sleeper - Part One
 
06:40
The goal is to create a solo sleeping area in the canopy/bed of a pickup truck. As you can see such a thing can be easily accomplished without too much work. All one needs is a good plan, some materials, a few tools, some skill, and you're off to the races. I'm very fortunate to have access to a wood working shop with a lot of higher end tools and a Girlfriend who's willing to help me out as that definitely makes the job easier, faster, and more fun. At this point all of the framework is finished and all that needs to be done are a few finishing touches to the bed of the truck and the canopy itself. The rest will be shown in detail in part two of this series coming out whenever I get around to posting it. ▼ AMAZON STOREFRONT ▼ https://www.amazon.com/shop/xazazelx13 ▼ GEAR UP TODAY! I PERSONALLY USE ALL THE FOLLOWING ITEMS! ▼ Dewalt 6 inch high performance angle grinder. The same grinder I use on the pipeline! http://amzn.to/2tBNteb Honeywell Fibre-Metal Pipeliner welding helmet. The same welding hood seen in my videos! http://amzn.to/2FwqarK Sellstrom flip front adapter for your pipeliner. http://amzn.to/2p6tn76 Miller Electric half mask respirator. http://amzn.to/2FQRdgU Fibre-Metal 8 point harness hard hat. Use only the best! There's many different colours available. http://amzn.to/2p8wYAZ Bob Dale 1525 welding gloves. The best welding glove on the market. The same ones I use! http://amzn.to/2HrHLxs Mechanix Wear Fastfit gloves. http://amzn.to/2FxtXVL Steiner orange flame retardant jacket. http://amzn.to/2HsxvoE Carharrt duck bib overalls. http://amzn.to/2DlVB1W Carharrt washed denim bib overalls. Great in the summer! http://amzn.to/2DmoHyq Carharrt flame resistant duck bib overalls. http://amzn.to/2DoARa9 Sellstrom Knee Pro knee pads. http://amzn.to/2Hu0wjU Red Wing 8 inch waterproof steel toed work boots. The best work boots I've ever owned! http://amzn.to/2FChWKI Baffin Icebear polyurethane work boots. http://amzn.to/2GoHV9K Dunlop Explorer thermo winter work boots. http://amzn.to/2FIAmNc ▼ SOCIAL MEDIA ▼ FACEBOOK ▶︎ https://www.facebook.com/xAZAZELx13 INSTAGRAM ▶︎ http://instagram.com/xazazelx13 TWITTER ▶︎ https://twitter.com/xAZAZELx13 GOOGLE+ ▶︎ https://plus.google.com/+xAZAZELx13/ #DIY #Truck #Camping
Просмотров: 280167 xAZAZELx13
Furniture Cam Lock and Nut
 
03:27
What are these funny looking fasteners that come with do it yourself furniture? Well, one might be a cam lock and nut. This video will show you what one looks like and how it is installed.
Просмотров: 361671 HowToWith GEO
Bed Frame C-Clamp
 
01:18
This video shows you how to install a C-Clamp onto a bed frame.
Просмотров: 56738 bedframestore
Stick Welding Square Tubing
 
09:22
Click on the link below to view my latest video on Stick Welding Square Tubing: http://youtu.be/7IHGYdkKHD0 In this video I am going to be demonstrating Stick Welding Square Tubing. I chose to stick weld (SMAW) the tubing, because of the thickness of the walls and also because the application of the tubing will require it to hold a lot of weight. I also feel like I needed to provide a practical application for using stick welding and I think this project fits nicely. I hope you will enjoy the video, and if so, please hit the "Like" button after watching. Also, don't forget to subscribe to my YouTube Channel so you can be updated whenever I post a new video. Take Care, Dan
Просмотров: 1001742 WeldFever
How to put a bed frame together
 
03:44
This video shows you how to put a standard bed frame together. This product is a 45-G standard bed frame for Twin/Full beds. You can purchase one here: https://www.thesleepshop.com/store/pc/Queen-Size-Bed-Frame-Standard-Model-2p54.htm
Просмотров: 187897 bedframestore
How to install bed frame Knickerbocker 4650G
 
03:17
Premium heavy duty bed frame. Offered by http://www.michigandiscountmattress.com/mattress_metal_frame_with_center_support.php (248) 841-8544 Knickerbocker 4650G premium metal frames fit standard sizes up to queen and come with headboard mounts and plastic end caps. Constructed of durable high strength steel, some of the strongest used in the industry. Total of 6 recessed legs with glides.
Просмотров: 22042 Michigan Discount Mattress LLC
Introduction to Square Tube Bending @ Trick-Tools
 
07:32
We walk you through and demonstrate what you can expect when bending square tubing. Wall deformation, bend angle, radius and bending equipment are a few of the topics covered in this video. See all tube benders at Trick-Tools here http://www.trick-tools.com/Tube_Pipe_Bending_125
Просмотров: 1290878 TrickTools
How to Use a Hand Plane
 
07:41
Watch the full episode: https://www.youtube.com/watch?v=NVbzx3ybYJI&index=11&list=PLkJADc1qDrr-U3jevgVkJt9YXYy_ZfHau This Old House general contractor Tom Silva demonstrates the proper way to use hand planes. (See below for a shopping list, tools, and steps.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Shopping List for How to Use a Hand Plane: - Machine oil, used to lubricate sharpening stone - Wood block, used to prevent tear-out in end grain Tools List for How to Use a Hand Plane: - Bench planes - Specialty planes - Block planes - Sharpening stone, for sharpening plane irons - Clamp, used to secure wood block to workpiece Steps for How to Use a Hand Plane: 1. Bench planes are used to flatten and smooth broad wood surfaces and narrow edges. 2. Long bench planes are best suited for smoothing very long surfaces and edges. 3. Specialty planes, such as a shoulder plane or rabbet plane, have plane irons (blades) that come flush with the edges of the tool. 4. Block planes are compact, versatile, and ideally suited for smoothing edges, small surfaces, and end grain. 5. Rotate the adjusting nut to control the depth of cut. 6. Pivot the lateral adjustment lever to square up the iron to the plane body. 7. Release the iron cap and extract the plane iron from the plane. 8. Test the sharpness of an iron by standing it on your thumbnail. If the iron slides off, it needs sharpening. 9. To sharpen a plane iron, start by applying machine oil to the coarse side of a sharpening stone. 10. Set the iron against the oiled stone with its beveled end facing down. 11. Tilt up the iron until its bevel is flush with the stone. Maintain that exact angle as you slowly rub the iron across the stone in a circular motion. 12. After a minute or two, flip over the iron and place it flat against the stone. Rub the iron back and forth to remove any burr from the back surface. 13. Next, flip the stone over to reveal its smooth surface. Apply oil and repeat the sharpening process. 14. Then raise the iron just a fraction of an inch, and make two or three passes across the stone. 15. Repeat the thumbnail test of Step 8 to check the iron's sharpness. 16. When planing the narrow edge of a board, inspect the direction of the wood grain on the side of the board. 17. Always plane in the direction of the up-angling wood grain. Don't plane against it. 18. Adjust the throat (mouth) of the plane to increase or decrease the gap between the plane iron and the bed of the plane. The proper adjustment will help prevent tearing out the grain. 19. Decrease the gap when planing end grain, and increase it when planing edge grain or making deep cuts. 20. When planing end grain, prevent tear-out by planing in from both ends toward the middle. 21. Another technique is to clamp a sacrificial wood block to the end of the board prior to planing. Then, any tear-out will occur in the block, not the board. Follow This Old House and Ask This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 360353 This Old House
How to install a metal roof ridge cap for Union's MasterRib panel.
 
01:25
No sales pitch or other fluff. Just simple 3D animated digital instructions on how to install a ridge cap on a MasterRib metal roof. MasterRib is a 36" wide 5 rib panel very common on residential and ag applications. See our full range of installation videos at www.unionmetalroofing.com or on YouTube. You can call us at 888-MTL-ROOF. IMPORTANT NOTICE: These instructions are for illustrative purposes only and may not be appropriate for all applications. Please consult your licensed roofing contractor for detailed instructions for your specific application.
Просмотров: 526662 UnionCorrugating
steel box section
 
00:50
steel box section sizes australia steel box section connectors steel box section steel box section sizes steel box section properties steel box section connectors steel box section end caps steel box section load calculator steel box section weights steel box section yield strength steel box section b&q steel box section steel box section strength
Просмотров: 124 Yunasti Bolop
How to Mud and Tape Drywall Corners - This Old House
 
02:30
Creating perfectly smooth wall corners with This Old House general contractor Tom Silva. (See below for a shopping list and tools.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Full episode: https://www.youtube.com/playlist?list=PLkJADc1qDrr8mfl5BwtXlwYV9zxvbi-Eq How to Repair a Cracked Drywall Ceiling: https://www.youtube.com/watch?v=Btkt0F7O-O8&index=124&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV How to Mark for Electrical Boxes When Hanging Drywall: https://www.youtube.com/watch?v=DxjmpXrYohI&index=164&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV How to Repair Plastic Walls: https://www.youtube.com/watch?v=P4D0sESi5So&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=237 Shopping List for How to Mud and Tape Drywall Corners: - drywall paper tape - joint compound - metal-reinforced drywall tape - metal or plastic corner bead - pre-formed drywall tape - drywall nails - aerosol contact cement - 120-grit sandpaper Tools for How to Mud and Tape Drywall Corners: - various width drywall knives - inside-corner drywall trowel - corner-bead crimping tool and rubber mallet - hawk Follow This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 363882 This Old House
How to Repair a Wobbly Newel Post - This Old House
 
03:04
This Old House general contractor Tom Silva shows how to stabilize an unsteady staircase post. (See below for a shopping list and tools.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse How to Install a Stair Handrail: https://www.youtube.com/watch?v=wYBYzxsH8bs How to Build Deck Stairs: https://www.youtube.com/watch?v=IYs7XWSYDRA How to Make a Spindle Headboard: https://www.youtube.com/watch?v=HZqajwS6Ryk Shopping List for How to Repair a Wobbly Newel Post: - two ⅜-inch-diameter x 36-inch-long threaded rods, used to fortify post - two coupling nuts, for attaching hanger bolts to threaded rods - two hanger bolts - ½-inch-thick plywood - carpenter's glue Tools for How to Repair a Wobbly Newel Post: - utility knife - thin pry bar - flashlight - drill/driver fitted with three 12-inch-long drill-bit extensions and ¼-inch-diameter x 12-inch-long drill bit, used to bore pilot holes in base of post - pliers - router with slot-cutting bit chisel - ¾-inch-wide chisel and hammer - jigsaw - ratcheting socket wrench - 7/16-inch-diameter drill bit - reciprocating saw Follow This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 167200 This Old House
Wheelstanding Dump Truck! Stubby Bob’s Comeback - Roadkill Ep. 52
 
32:16
Bam! Stubby Bob goes big-time in this episode of Roadkill, presented by Dodge. In episode 44 of Roadkill, Mike Finnegan and David Freiburger took a 1950 Ford F6 dump truck and shortened the wheelbase to just 102 inches so it would look freaky-cool—but the truck wasn’t road trip–ready by the end of the show. This time, the truck is transformed by a supercharged big-block Chevy in the back with a Gearstar 4L80E transmission and a V-drive from a boat—all set up like a ’60s dragstrip exhibition wheelstander. But as the buildup continues, the big question is whether the weight balance and the massive dualie tires will really allow the truck to jerk the wheels off the pavement or not. The answer is some action you can’t miss. Roadkill is supported by Optima Batteries, CRC Industries, Lincoln Tech, Cooper Tire, Pioneer, and Jegs! We also thank Weiand, Gearstar, and Slims Fab Farm for help with parts for this episode. Roadkill on the MOTOR TREND channel. https://www.youtube.com/motortrend Subscribe now to make sure you're in on all the action! https://www.youtube.com/subscription_center?add_user=motortrend Facebook - https://www.facebook.com/RoadkillShow, http://facebook.com/motortrendmag & http://facebook.com/hotrodmag Twitter - http://twitter.com/motortrend & https://twitter.com/hotrodmagazine Google + - https://plus.google.com/+motortrend/p... Website - http://www.motortrend.com & http://www.hotrod.com Roadkill Shop - https://shop.roadkill.com/p To order parts used on this episode go to http://www.Jegs.com/RoadKill Champion Cooling Systems – Part# 166-MC370K2 Radiator 67-69 Camaro BBC – Part# 166-MC370 Elect Fan-12” Dual 225W – Part# 555-52118 Fan Mount Bracket Kit – Part# 555-52120 Recirc/Overflow Round Clr – Part# 555-51135 Radiator Cap – Part# 555-51162 Dual Fan Harness – Part# 555-10570 Swivel H2O Neck – Part# 555-53020 Lakester Steel Throttle Pedal Assembly – Part# 625-BAG-6154 B&M Pro Stick Shifter – Part# 130-80706 8-71 Supercharger Kit – Part# 925-7386 Hi-Performance Carburetor Linkage Kit – Part# 925-7166WND Shiny Supercharger HP Carb – Part# 10-0-80576S Carb Dual Fuel Line Kit – Part# 925-7093 Weld-Up Header Kit – Part# 520-5483 Holley 12-150 Electric Fuel Pump – Part# 510-12-150 Ano-Tuff AN to Pipe Adapter Fitting – Part# 361-AT981608 Ano-Tuff AN to Pipe Adapter Fitting – Part# 361-AT981666 Holley 12-840 Billet Adjustable Regulator – Part# 510-12-840 Earl's Ano-Tuff AN Swivel-Seal Hose Ends Part# 361-AT800106, Part# 361-AT800108, Part# 361-AT804606, Part# 361-AT804608, Part# 361-AT809106, Part# 361-AT809108, Fuel Pressure Gauge – Part# 361-100189 Team-G Water Pump – Part# 925-9243 Water Pump Pulley – Part# 720-4967 Water Pump Pulley – Part# 720-4961G
Просмотров: 7592481 Motor Trend Channel
Testing some M35 COBALT drill bits from Banggood...  Excellent, High quality product...!!!
 
20:17
In this video, I'll be testing some M35 Cobalt drill bits I ordered from Banggood an Asian Trade company in the same fashion as Amazon or Aliexpress. I'm testing the drill bits to their limits against more popular and cheaper drills. The prices for those drill bits is really good and the overall quality of the product is surprisingly good no regard to the price. I will test the Banggood drills against some popular products available in Canada ( Canadian Tire ) and in the USA ( Harbor Freight ), to my surprise the Banggood M35 Cobalt drill bits will perform very good in increasingly harder test materials up to at least 47 Rockwell on the C scale. Those drill bits would make an excellent everyday set that will drill into just about everything and last a long time. Just make a note that their 135 degrees grind make them perform better in harder materials, if you need to cut mostly in softer alloys or aluminum you could regrind the tips at 118 deg. My opinion of those drill bits is that it will perform very nicely with everyday operations in hard alloys steels and can easily be reground if needed. References to Banggood web trading site... =================================== You can get all the details to order the tools tested in this video by following the links below... Set of 15 Metric M35 COBALT drill bit set: https://goo.gl/VvAiy2 -------------------------------------------------------------------- If there are coupons available...!!! Use them...!!!! I am glad to tell you that from 7th to 9th Sep. there is an anniversary big sale going on for banggood I hope you can announce the preferential offer on your fb or ig. 24hrs electronic blitz sale: https://goo.gl/1LoUJL limited offer RC products: https://goo.gl/EJQ1SB buy 3C products with discount: https://goo.gl/YDx3jW 10%off coupon for Electronics products: 11annvele10% 10%off coupon for 3C products: 11annv3c10% 10%off coupon for computer& networking products: 11annvcom10% =================================== Thank you for viewing... Hope you enjoyed and please leave a comment, like and subscribe Pierre Beaudry wledpierre@gmail.com
Просмотров: 16721 Pierre's Garage
How to Install a Storm Door with a Dog Door
 
09:52
Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-hot-water-storm-door Ask This Old House general contractor Tom Silva helps a homeowner install a storm door with her active dog in mind. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 1-2 hours Cost: $250 Skill Level: Moderate Tools List for Installing a Storm Door with a Dog Door: Drill/Driver Caulking Gun 1/8” drill bit 3/8” drill bit 3/32” drill bit Shopping List: Storm Door with Dog Door Caulking Steps: 1. Measure the door where the storm door will go and be sure to get the right size. In this case, the door is 80” x 36.” 2. Measure to ensure the door is square before you install the storm door. Use the 3-4-5 method to help. The jamb is three feet wide at the top. Use a tape measure to measure down 4 feet. Hold the tape measure at that point and measure at an angle to the top of the jamb. If the measurement is 5 feet, the door jamb is square. 3. The hinge can go on either side, but conventionally the hinge will match the hinge on the current door. 4. Match up the primer hole in the hinge to the hole in the storm door. Use a drill/driver to fasten the first screw in along the hinge. 5. The rest of the holes will need to be drilled first. Use a 1/8” drill bit on a drill/driver to make the holes. Use drill/driver to fasten the remainder of the screws along the hinge. 6. To attach the hinge to the door jamb, push the storm door up flush with the frame and drop it just a touch. Then drill one screw in the middle to fasten the hinge on the outside of the frame and a second on the inside of the jamb. 7. Close the storm door and check to see if it fits. 8. Finish off the screws on the interior of the hinge jamb using a drill/driver. 9. Extend the extension piece at the base of the storm door to ensure it is flush with the threshold. 10. Drill in the remainder of the screws on the exterior of the hinge jamb into the casing. 11. Run a thin bead of caulk along the drip cap for the storm door. 12. Place the drip cap along the top of the storm door and push it flush to the casing. 13. Move the drip cap up just slightly to create an even gap along the top of the storm door. 14. Use a drill/driver to fasten screws along the drip cap. 15. Run a bead of caulking across the top of the drip cap following installation as an added weather barrier. 16. Line up striker side of the storm door jamb to the casing and use a drill/driver to fasten in the screws. 17. Line up hardware so it will not butt up against current hardware on the current door. 18. Line up template with predetermined placement of hardware. Use a 3/8” drill bit to bore out the center hole for the hardware using a drill/driver. Use 1/8” drill bit for the two remaining holes. 19. Attach the hardware using screws and drill/driver. 20. Line up the latch on the jamb to the hardware and use screws and drill/driver to fasten. 21. Attach compressor to either the top or the bottom of the door. Use a drill/driver to fasten the hook to the jamb. 22. Use a 3/32” drill bit to bore out holes in the base or top of the door. Use these holes to attach the compressor to the storm door with a drill/driver and screws. Install the adjustable sweep at the bottom to keep drafts out. Follow This Old House and Ask This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse https://twitter.com/asktoh Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 213936 This Old House
DIY PVC Pipe Train Whistle –  How to make
 
02:15
PVC Pipe Train Whistle – How to make Today I will show you how to make a simple train whistle with multiple tones using some PVC pipe. This design consists of 3 individual whistles combined to make the familiar train whistle sound. To make this project, you will need some 1/2-inch PVC pipe & fittings, a 5/8-inch wooden dowel, a saw, a hammer, a ruler, and a metal file or sand paper. I first cut the PVC into 4, 6, and 8 inch pipes. These lengths are important because they help determine the tone of each pipe. It is possible to tune each whistle to a specific musical key by adjusting the lengths further, but I wanted to keep it simple, so I chose 4, 6, and 8. Next cut a notch about 1-inch from one end of the first pipe. The angle of the notch is important to help make the sound. The first cut needs to be at a 90 degree angle. The second cut needs to be at 45 degrees. Both cuts need to intersect about half way through the pipe. Now take the wooden dowel and place it next to the pipe on the notch side. Cut a piece just shorter than the small section of the pipe. Then using a file, flatten one side of the wood, removing around 1/8 of the diameter. Next the dowel needs to be hammered into the PVC. MAKE SURE THE FLATTENED SIDE IS FACING OUT TOWARDS THE NOTCH. The dowel needs to be inserted until the front edge is level with the 90 degree cut of the notch. Then repeat these steps for the other two pipes. The rest of the assembly is pretty simple. Placing an end cap on the long side of the PVC should complete each whistle. Test each one to make sure it works and make adjustments if needed. Using some additional pipe and fittings, I combined all three pipes together to make the train whistle sound. The sizes and lengths of these additional pieces are not critical, so customized them as you wish. Now you can have fun with your new whistles! Social Networks: Facebook: https://www.facebook.com/specificlovefanpage Twitter: https://twitter.com/Specific_Love Pinterest: http://www.pinterest.com/specificl/ Psalm 100:1 Please Like and Comment -------------------- More PVC Projects you will like: PVC Dog Wash - Pet Life Hacks https://youtu.be/ylnORx0iaX0 PVC Cat Bed Hammock with Toys https://youtu.be/F22KUBUbBKY Lego Table DIY with PVC https://youtu.be/FoRbJ--u2Pc Ping Pong Ball Launcher Cannon https://youtu.be/P7vjKovMSNA PVC Shotgun - Rubber Band Gun - Nerf Gun https://www.youtube.com/watch?v=O6Q9DJp4jmQ PVC Blowgun Revolver - Six Shooter - How to make a Blowgun http://www.youtube.com/watch?v=Y9m30bknrqM How to make a Bow - PVC Bow - Quick and Easy http://www.youtube.com/watch?v=1ib_hH49p6g How to make a PVC Bow for Kids - Quick and Easy http://www.youtube.com/watch?v=p_TY-tch6gU How to make a Crossbow - PVC Mini Crossbow for Kids http://www.youtube.com/watch?v=fDby7p8vrdQ How to make a Mini Cannon that Shoots - PVC pipe projects http://www.youtube.com/watch?v=sXDoksydX00 How to make a Rubber Band Gun - PVC Rubber Band Gun http://www.youtube.com/watch?v=GUfHHLcV8Zk How to make a Paper Rocket Launcher with PVC http://www.youtube.com/watch?v=HOx1wpxVFvY How to make a PVC Balloon Gun that Shoots http://www.youtube.com/watch?v=_-qOeeahuCY How to make a Jousting Stick with 2 liter bottles and PVC pipe http://www.youtube.com/watch?v=Hon1kjKoBYs PVC Rubber Band Machine Gun Gatling Gun https://www.youtube.com/watch?v=ifwZqF8i8uE 3 Simple PVC Football Field Goal DIY Décor https://youtu.be/g8cLPtvqQvU Use of video content for personal projects is at your own risk.
Просмотров: 55213 Specific Love Creations
How to Build a Rolling Pipe Slide
 
11:54
Here is a great addition to any Agritourism venue! Fun for all ages and incredibly durable! Materials List for 16’ Rolling Pipe Slide: (We recommend purchasing all pressure treated lumber.) 2 – 2”x10”x16’ (Main Side Rails) 2 – 2”x6”x16’ (Safety Rails) 2 – 4”x4”x8’ (Legs – you will need 2 more if not setting upper end on platform) 4 – 2”x4”x8’ (on 2’ centers between bottom of main side rails) 2 – 2”x6”x8’ (Angle bracing on bottom of slide) 15 – 3”x10’ PVC 90 – 3” PVC Domed Caps 23 – lengths of ½” electrical conduit (outside diameter is just under 3/4”) Tools Needed: ¾” wood drill bit 24 - 3.5” lag screws to secure main rails and safety rails into the 4X4 posts Saw to cut wood & PVC Saw or grinder to cut conduit 5lb box of 3” outdoor wood screws
Просмотров: 392898 Agritourism Ideas
How David Fincher Hijacks Your Eyes
 
05:31
Get 10% off any purchase here: http://squarespace.com/nerdwriter PATREON: http://www.patreon.com/nerdwriter T-SHIRT: https://store.dftba.com/products/the-nerdwriter-shirt TWITTER: https://twitter.com/TheeNerdwriter E-MAIL: me here: thenerdwriter@gmail.com Tony's video: https://www.youtube.com/watch?v=QPAloq5MCUA&t=2s KaptainKristian's video: https://www.youtube.com/watch?v=QChWIFi8fOY&t=229s
Просмотров: 1900597 Nerdwriter1
Dirty jobs How to Polish Aluminum by a Master Detailer - Aluminum Polishing Tutorial
 
09:39
A video to teach people how to polish aluminum the right way! this video was my first ever Youtube video, although i use different products now the same process still applies. :) thanks for watching and enjoy! Here's a link to my store, I only carry items I personally use on daily basis to run my own polishing business so there's no guessing games to see if the products work! I know they do. :) www.dcsupershinestore.com
Просмотров: 1279279 DCSuperShine
Gas Lift Bed Frame Assembly Tutorial
 
06:10
Welcome to Instock's YouTube channel! Here we upload tutorials for assembling our products. If you're having difficulty with a step, please comment below or send us an email at service@instock.co.nz and we will do our best to help :) The Gas Lift Queen Bed Frame is available in store now for $399! With this bed frame, you may notice that the first step sheet is backwards - the order that you assemble the metal frame and the bed base does not matter. See our website here: http://www.instock.co.nz/ And head to our Facebook page to give us a like! https://www.facebook.com/InstockNZ/?fref=ts Second Nature by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/
Просмотров: 106654 Instock Furniture
angle steel bar ,stainless steel equal angle sizes
 
00:13
Website: http://www.zhongtongsteelpipe.com/ E-mail:zhongtongsteelpipe@126.com Our company was founded in May 2009, covering an area of 300mu. Our registered capital is 40 million Yuan. We have more than 600 existing staff members, among whom managers with senior title and technicians amount to 41 people. We are an enterprise specialized in the production of cold-formed steel, square steel and rectangular steel. Our annual production capacity is 80 million tons. Our products are widely used in construction steel structure, bridge structure, automobile manufacture, machinery manufacture, etc.
Просмотров: 18 Zhongtong Steelpipe
How to make an Ocean Table // Concrete and Epoxy Resin
 
13:13
I made a concrete/epoxy table that looks like a cross section of the ocean! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 Check out Homemade Modern: https://www.youtube.com/user/HomeMadeModern MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com TOOLS LIST: (some are better than the versions I own) http://www.homedepot.com/p/Quikrete-80-lb-High-Early-Strength-Concrete-Mix-100700/100318486 - Quikcrete 5000 http://amzn.to/2lh6722 - Clear Table Top Epoxy Resin http://amzn.to/2kfmWKv - Nitrile Gloves (for mixing) http://amzn.to/2kLu8Bf - Plastic mixing buckets http://amzn.to/2aCJYGu - SawStop cabinet saw http://amzn.to/2aofRls - 8" Dado stack http://amzn.to/2axOLvq - Dewalt 20v drill driver combo http://amzn.to/2da9fOJ - Evolution miter saw (cuts wood, alum, steel, etc) http://amzn.to/2dcJoTR - Countersink drill bits http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter http://amzn.to/2akFN6c - 2HP Dust Collector http://amzn.to/2axPmNA - 1 Micron bag http://amzn.to/2axFGW9 - Speed square http://amzn.to/2ay8MSs - Digital Angle Gauge http://amzn.to/2kkwcPS - Danish Oil http://amzn.to/2ayihkF - Quikclot clotting sponge http://amzn.to/2aLCCCN - First aid kit http://amzn.to/2aovz06 - Respirator http://amzn.to/2aW3nHn - Filters http://amzn.to/2aY182W - Eye protection http://amzn.to/2axUZ0X - Ear protection Want to support ILTMS? Get exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms
Просмотров: 6041438 I Like To Make Stuff
Home Machine Shop Tool Making - Making A Versatile Bluing Tray
 
09:41
Making A Versatile Bluing Tray, by Clickspring. The heat blued finish put on some steel parts by clock and watchmakers is quite dependent on a consistent, even heat being applied to the part. Smaller parts like short screws can be heated on a thick piece of brass with holes drilled to accept the threaded portion of the screw. Larger parts are best heated on a bed of brass chips, held within some sort of tray. For some time I've been using a tray cobbled together from brass scraps, so in this video I make a more permanent version. Thanks for watching. If you enjoyed the video please give a thumbs up, and leave me a comment. If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: https://www.patreon.com/clickspring You can also help me make these videos by purchasing via the following Amazon Affiliate links: Cameras used in this video: Panasonic GH5 - https://amzn.to/2rEzhh2 Panasonic X920 - https://amzn.to/2wzxxdT Tools & Shop Products: "Solidworks 2013 Bible": http://amzn.to/2FObS1D "Lathework: A Complete Course (Workshop Practice Series)" - https://amzn.to/2yBv4Rb "Milling: A Complete Course (Workshop Practice Series)" - https://amzn.to/2K2QZ97 "Soldering and Brazing (Workshop Practice Series)" - https://amzn.to/2yIRoIW Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: https://amzn.to/2ITfeTa YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: https://amzn.to/2G7ylv6 For more info on this build, as well as other tool making info and project plans, visit http://www.clickspringprojects.com Abbreviated Transcript: 0:00:23 The idea behind a tray full of brass chips is that it helps to spread the heat evenly over the whole part, so it's a great way to get a uniform color. 0:01:00 It does have a few redeeming features though, the legs holding it off the bench were a good idea, although they've oxidised quite a bit from the heat, so I might try brass this time and see if that makes any difference. The handle is fine too, so I'll cut that off, and re-use it. I'm also going to make 2 versions of the tray, that can screw onto the end of the handle as required. 0:01:24 One will be the more permanent version of the brass shavings tray I just spoke of, and the other will be a plate version, with holes in it for for screws. This time with small holes! I can also make more variations on the idea in the future, and reuse that handle. 0:02:04 I then formed a thread on the end of the handle. I then formed a thread on the end of the rod. The feet for the bluing pan are a reasonably straight forward part, with a taper on one end, and a thread on the other. And I quite like holding small parts like this with an ER collet, 0:02:54 The opposing features will be closer to being concentric, and it gives a much better grip on the part than the three jaw chuck. I started out by forming the tapered profile, setting up the lathe to cut a 10 degree included angle. 0:04:10 The tray that will hold the shavings is fabricated from 2 parts that are silver soldered together, so I spent a bit of time getting the surfaces clean and well fluxed, before making the join. All of the outside surfaces now need a good trim, and to do that I need the part running reasonably true before making the cut - another great job for the bump centering tool. 0:07:33 Now I'm going to lightly rivet the ends of the feet once they've been screwed in place, so I'm forming a decent countersink on the top side, to give the metal somewhere to flow as its displaced. 0:08:05 In good quality clock and watchmaking, heat bluing is traditionally used as a final surface finish on some steel parts As the part is heated an oxide forms on the surface. The thickness of the oxide is directly related to the temperature of the part. The hotter it gets, the thicker the layer. 0:08:21 The color comes from a light effect called Thin Film Interference. To get a uniform color, its essential that the thin film of oxide is uniform in thickness across the whole part, which in turn means that the temperature must be uniform, hence all the effort in making this bluing tray. 0:08:39 The colors move through a range starting at a light straw, and then passing through brown, purple and blue, to a light grey, after which the thin film effect is no longer visible. The composition of the steel, cleanliness and surface finish all play a role in the way the oxide forms, and so can directly influence the quality of the final color. References: Thin Film Interference Effect Explained: https://en.wikipedia.org/wiki/Thin-film_interference Making A Versatile Bluing Tray, by Clickspring.
Просмотров: 554975 Clickspring
New Victor Tube forming machine in Africa - www.tubemills.net
 
05:05
http://tubemills.net/products/tube-mill-machine/tube-forming-machine-vzh-45/ Rentian Tube forming machine in Africa Rentian Tube forming machine advantages: 1, Long term stable machine bed which is "machine bed annealing after welding to eliminate welding deformation stress in 48 hours", while other tube mill manufacturer don't; 2, High alignment assembling based on "the high-precision of assembling is ensured by CNC machining working accuracy of parts", rather than assembled by relying on manual test assembling, cushion padding, looking for benchmark, welding positioning key etc.; 3, Based upon deformation stress analysis, the biggest force normally in forming when the strip from flat to round, and in end of sizing to become square and rectangle or in straightening step, so for normal machine we use double-driving, split-type main machine, thus our configuration will be ONE more set of DC drive motor, and ONE more main reduction than other factory's design; 4, The usage of higher drag motor power, then can achieve more higher production speed, and more broader products specifications; 5, Between main drive motor, reducer, points transmission case adot high strength and stable gear couplings; 6, Through deformation analysis, the quantity of roller frame configuration and roller is more, then will be more beneficial to stablize deformation, finally to obtain higher quality welding and higher precision dimensions; 7, Bearing designation is bigger than other companies, and the front roller shaft frame are all adopt three stand joint bearing of heavy load design, and front and rear bearing end caps are designed with grease nipple fill, with seal protection; 8, Main machine vertical and horizontal roller stand all adopt copper alloy protection; 9, After welding, removaling outer burr, using standard horizontal rollers to polish welding seam, rather than simplifying to vertial roller frame; 10, Friction saw and Cold saw's drive more stable, lower resistance (even hand can easily push it). Email: sales@victormac.com
Просмотров: 3707 Allen Chen
How to Drill Hard Steel
 
01:48
Drilling steel or metal is a quick way to dull your drill bits if you do it the wrong way. This AsktheBuilder.com video shows you how to drill holes using the correct bits and oil to drill through steel and sheet metal. Sign up NOW for Tim's FREE weekly newsletter at: http://go.askthebuilder.com/NewsletterSignupNow Discover more at askthebuilder.com on drills, drill bits and drill reviews: http://www.askthebuilder.com/drilling-ceramic-tile/ http://www.askthebuilder.com/bosch-hd18-2-hammer-drill-review/ http://www.askthebuilder.com/change-drill-bits-in-a-snap/
Просмотров: 338720 Ask the Builder
MIG Welding Techniques for Building a Mild Steel Roll Cage
 
05:46
Using proper MIG welding techniques in roll cage fabrication with mild steel is critical to achieving weld quality, and many race cars must pass certification with qualified welds. Fabricating roll cages involves many different joint angles, so MIG gun nozzle placement is key to proper weld fusion. Chris Jarman, owner of Michigan-based fab shop Eliminator Kustoms, shows how to weld a roll cage with a Millermatic® 212 Auto-Set™ MIG welder and discusses the various tube angles involved — 90 degrees, 45 degrees and 30 degrees. Jarman also demonstrates proper pull and drag welding methods, and how you can decide which method you should use in MIG welding. To learn more about the Millermatic 212 Auto-Set MIG welder, go to https://www.millerwelds.com/equipment/welders/mig-gmaw/millermatic-212-auto-set-mig-welder-m00456?utm_campaign=social&utm_source=youtube&utm_medium=social&utm_content=description And for more racing, customization and restoring tips, visit: https://www.millerwelds.com/industries/industry/racing-customizing-restoring?utm_campaign=social&utm_source=youtube&utm_medium=social&utm_content=description --------------------------------------------------------------- SUBSCRIBE to Miller Welders on YouTube: http://bit.ly/MillerWeldersSubscribe CONNECT with Miller Welders: Website: http://bit.ly/MillerWelds Miller Forums: http://bit.ly/MillerWeldsForums Facebook: http://bit.ly/MillerWeldersFacebook Instagram: http://bit.ly/MillerWeldersInstagram Twitter: http://bit.ly/MillerWeldersTwitter LinkedIn: http://bit.ly/MillerWeldersLinkedIn ABOUT Miller Electric Mfg. Co.: Miller Electric Mfg. Co. is a leading worldwide manufacturer of Miller® brand arc welding and cutting products. The Miller Welders channel provides the tips and techniques you need to tackle even the most challenging applications, and shares the stories of welders around the world who believe that together, WE BUILD. http://bit.ly/MillerWeldersYouTube
Просмотров: 859712 Miller Welders
Vinyl Fence Installation Tips: Attaching the Gate
 
03:22
You've installed the fence posts and gates, and now its time to attach the gate. First, measure the clearance for the gate and hinges. Lay a wooden board on the ground to mark where the gate will be, and then mark the position of the next post. Dig the hole and set the post inside. After filling with concrete, it is time to install the gate hardware. Make sure to attach all gate hinges before hanging the actual vinyl gate. Once the hardware is in place, set the gate on wood blocks to the desired height. To finish off the gate, screw in the hinges, handle and latch lever. The only steps remaining in the fence installation process is adding vinyl fence post caps. Simply insert vinyl cement inside the post cap and place on top of your fence posts. To learn more about fencing installation and to find the printable instructions for this video, visit http://www.Lowes.com/Videos Subscribe to Lowe's YouTube for great how to videos and home improvement tips: http://www.youtube.com/subscription_center?add_user=lowes Or head to our channel: http://www.youtube.com/Lowes
Просмотров: 333571 Lowe's Home Improvement
seven ways to remove a broken screw
 
10:11
tutorial that show seven techniques to extract a broken screw
Просмотров: 7951830 Cruzdelasadas technical
How to Glue PVC Boards Trim & Moulding
 
04:47
PVC Cement→ http://amzn.to/2dTn1FL PVC Trim to Home glue→ http://amzn.to/2dQ7fcA Caulking Gun (pricey one)→ http://amzn.to/2eg94xB PVC Brick Molding→ http://amzn.to/2eb7alJ SUBSCRIBE→ https://www.youtube.com/c/AdamDIY?sub_confirmation=1 This pvc trim is great in my opinion. The swelling and water wick of wood makes paint chip and flake off. But the PVC holds paint much better. Definitely worth a try. For PVC trim to the home use TeQ Mount Adhesive and for PVC to PVC use Oatey Heavy duty Clear PVC Cement. (both products are linked above) For some reason Lowes does put the glues right next to the boards. That may change but if you don't see it, go to the paint section and the sprinkler section. The boards I used are Royal Mouldings Limited PVC Board and they come in several profiles and sizes. Here's some features: Moisture- and termite-proof Lifetime rot-free warranty Mills and miters with standard tools Paintable ••••••••••••••••••••••••••••••••••• The camera I use: http://amzn.to/2ec3wTx My backup camera: http://amzn.to/2edXF1e Super handy tripod: http://amzn.to/2dfVRTq Wireless Mic I sometimes use: http://amzn.to/2dAgquC ••••••••••••••••••••••••••••••••••• Business Inquiries: please email me from the About page: https://www.youtube.com/c/AdamDIY/about Adam Hill - AdamDIY PO Box 95278 South Jordan UT 84095 Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not AdamDIY and or Adam Hill. If you are uncertain about any step of the process, or feel unsure about your skill level, seek a more authoritative source.
Просмотров: 100240 AdamDIY
Why Do Fence Posts Rot and Break - Wood Fencing Damage
 
05:03
http://www.homebuildingandrepairs.com/fences/index.html click on this link for more information about wood fence construction and home repairs. Watch this video to learn reasons why wood fence posts rot and fall apart. Moisture and water seems to be wood's worst enemy and let's face it in nature it's part of the decomposition process, so there isn't much we can do about it. However, if you understand what causes the wood post to rot, I'm pretty sure you can figure out a few ways to reduce these problems and extend the life of your fence. In other words, extend the life of your wood fence posts and save money in the future by reducing your future home repair bills. If this sounds good and you're looking for some more interesting tips and ideas, visit our websites today area
Просмотров: 564452 gregvancom
CAP  New system of Automatic Changing Table by TECOI
 
03:17
Quantum Machinery Group is a Leading U.S. Supplier of Metalworking Equipment. NEW Machines in stock and readily available for immediate shipment. Quantum Machinery comprises of a Full Sales Team with Before & After Sales Support, A Full Parts Department, and a Team of Trained Technicians, along with Turnkey Packaging, allowing us to assist you every step of the way; ultimately earning us the title as your One-Stop Shop for ALL of your Metalworking Machinery Needs. Call or email our Quantum Machinery Sales Engineers Today for your Next Machinery Purchase!! - (909)476-8007 | Sales@QuantumMachinery.com Quantum Machinery Group specializes in, offers, and stocks: • Roll Benders / Angle Rolls • Plate Benders / Slip Rolls • Press Brakes • Cold Saws • Band Saws • Tube and Plate Laser Cutting Systems • Rotary Benders • Iron Workers • Shears • Cutting Lines • End Formers • Twisting/Scrolling Bending Machines • Horizontal Press Brakes • Broaching Machines • End-Wrought Iron Machines • Gas Forges • Iron Embossing Machines • Presses for Locks • Welding Positioners • De-Burring Machines • And more!! Visit us online at - www.QuantumMachinery.com or come visit us at our Showroom, located at: 10270 Birtcher Drive Mira Loma, California 91752 Our Website: http://www.QuantumMachinery.com Our Twitter: http://www.Twitter.com/QuantumMachines Our Instagram: http://www.Instagram.com/quantummachinerygroup Our Google+: http://www.Plus.Google.com/+Quantummachinery Our Facebook: http://www.Facebook.com/QuantumMachinery
Просмотров: 4206 Quantum Machinery Group
76 - How to Make an Extreme Wooden Vise – Quick Edition
 
14:57
How to Make an Extreme Wooden Vise – Quick Edition This is a short video of how I made my Wooden Vise. Since I first made this vise a year and a half ago I’ve received many hundreds of emails from people who wanted a shorter version. So, this is it; 14 minutes instead of the original Hour & a Half. This is a serious vise and has the full grip strength of a real metal vise. I use it daily and it would make a wonderful addition to any shop. If you want to see the full three part highly detailed version, here is a link to the full series: https://www.youtube.com/playlist?list=PLIiM-fMXa1uze6gG3aXhB0PxdgqbYmZNC If you would like to build it for yourself the plans are here: https://kingsfinewoodworking.com/collections/project-plans-for-sale/products/extreme-bench-vise-plans Join our Woodworking group. Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools. http://www.facebook.com/groups/KingsFineWoodworkingCommunity The Parts I used in this build: 2” diameter x 4-1/2 thread per inch nut: http://amzn.to/2s6AP4T 2” diameter x 4-1/2 tpi threaded rod: http://amzn.to/2rFriBe The Wood I Used: Lignum Vitae piece for Clamping Jaws, 3”x3”x12”: http://amzn.to/2rpqXlu East Indian Rosewood for both Dynamic & Static Jaws, 6”x6”x2”: http://amzn.to/2srXVAv East Indian Rosewood for Caps at end of Handle 2”x2”x12”: http://amzn.to/2rFv4uw Marblewood for Screwhead 4”x4”x8”: http://amzn.to/2s6rbzj Marblewood for Handle: http://amzn.to/2ss4liS Finish & Wax: Deft Semi-gloss Lacquer (best there is): http://amzn.to/2rFSLCL Minwax Paste Wax: http://amzn.to/2rFTuEj The Tools & Bits I used: 3” Forstner bit for Nut: http://amzn.to/2rTmYPE 2-1/8” Forstner bit for Screw: http://amzn.to/2ssgOTM Flush trim router bit: http://amzn.to/2rFCLAD Pattern cutting router bit: http://amzn.to/2ssimgz Sandpaper I used Diablo: http://amzn.to/2qNgXjm Kobalt Wood Chisel: http://amzn.to/2rT5OC3 Wood Rasp & File: http://amzn.to/2qMR9Eh This vise is a Beast, the jaws are 12” and I can grab most anything with it. This is the most fun project I have built in probably over 20 years. And to top that off, I also get to use it every day in my shop! I decided that I wanted a bench vise for my shop, when my old one was finally seeming too small for everything. I went looking for one, and the more I looked the more I was intrigued by how they worked. I studied the parts involved and realized that they are not really all that difficult to build. There are really only 6 or 7 parts to the standard bench vise, and I could just build them one at a time. I decided to use all exotic lumber for the build because this was something that I wanted to keep forever, and really cherish. Also, exotics were also very hard and durable. The perfect wood for a vise. Although, it could just as easily be built out of a domestic hardwood such as oak or cherry and still be very durable. I needed to get only a small board of African Padauk, and one of Purpleheart. The rest of the exotic pieces I picked up either from Rockler or Woodcraft in their turning blank section. And since I always like to have a bunch of turning blank pieces around, I had all that I needed already in my shop. I spent a while perfecting the design for absolute maximum strength and ease of building. If you decide you need to build one too, you can pick up a set of plans from my website. They are extremely detailed 3D plans, and you can easily build this vise from them. If you went out and purchased all of the most expensive exotics for your build, it would cost about $250.00 - $300.00. That’s a whole lot less than the price of a bench vise with 12” jaws. Even if it is a cheap vise. So, not only can you save money, you can have the pride of doing it yourself. If you used something like oak, you can do this build for maybe $25 - $35, and a lot of the pieces, you probably have sitting in your scrap pile, since many of them are small. I hope you give it a try. It was without a doubt, one of the most enjoyable builds that I have done. And in the end, I got a tool that I use every single day now. If you would like to help support our channel, there are a number of ways. One way is direct support through Patreon: https://www.patreon.com/KingsFineWoodworking Another is by purchasing things you might need through our Amazon link. You pay the same and they pay us a small fee. https://www.amazon.com/shop/kingsfinewoodworking You can also help without spending anything, just by liking and sharing our videos. Thank you for your support. We love teaching the world to do woodworking.
Просмотров: 7280 King's Fine Woodworking
How to Build a Timber Retaining Wall - This Old House
 
05:38
This Old House landscaping contractor Roger Cook shows how to construct a wood-timber retaining wall to create a play area. (See below for a shopping list and tools.) Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Full episode: https://www.youtube.com/watch?v=rZqiSuJEz-U&index=9&list=PLkJADc1qDrr8JnEkf1GX2utInAXW6t2XP How to Repair a Fence Gate: https://www.youtube.com/watch?v=vCNugIF4JHU&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=15 How to Build a Miniature Golf Course: https://www.youtube.com/watch?v=SONWsZw8370&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=2 How to Frame Walls for a Basement Room: https://www.youtube.com/watch?v=aulgjB4rFU0&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV&index=20 Shopping List for How to Build a Timber Retaining Wall: - 1x3 wood stakes and nylon string, used to establish layout lines for timbers - 6x8-inch pressure-treated landscaping timbers, used to build retaining wall - wood preservative, to treat cut ends of timbers - 3/4-inch stone, used as base and drainage material - landscaping filter fabric, used to prevent soil from clogging drainpipe - 4-inch-diameter perforated drainage pipe, for draining water away from retaining wall - 1/2-inch-diameter (No. 4) x 4-foot-long metal reinforcing bar, used to stake timbers and dead men to ground - 12-inch landscaping screws, for fastening together the landscaping timbers - bark mulch, used to cover the ground in front of the retaining wall Tools for How to Build a Timber Retaining Wall: - hand tamper, used to compact the soil and stone base - wheelbarrow, used to transport stone and mulch to jobsite - shovel, for excavating the ground - circular saw, used to cut timbers - impact driver, used to drive landscaping screws into timbers - drill/driver with 9/16-inch-diameter spade bit, used to bore holes in timbers for rebar stakes - sledgehammer, used to drive in rebar and wood stakes - 6-foot level - torpedo level - foam paint brush Follow This Old House: Facebook: https://www.facebook.com/ThisOldHouse Twitter: https://twitter.com/thisoldhouse Pinterest: http://www.pinterest.com/thisoldhouse/ G+: https://plus.google.com/+thisoldhouse/posts Instagram: http://instagram.com/thisoldhouse Tumblr: http://thisoldhouse.tumblr.com/
Просмотров: 1191555 This Old House
Dog Xpen
 
07:15
How to make a Dog X-pen. Supplies you will need: Drill Jig saw Hacksaw (or electric mitter saw) or a large pipe cutter sheet metal screws 3-pieces of thick walled PVC 1-sheet of lattice 4-1 inch 3 way fittings 4-1 inch 4 2way fittings 4-1 inch end caps (optional) or 16-90 degree angles if making pannels and zip ties. Cut PVC into 4-32 1/2 inch lengths (double this if making pannels) 4-44inch lengths Cut Lattice into 1-48x24 inch pannel and 1-36x24 inch pannel along each side (lengthwise) so you have 2-48x24 and 2-48x24 pannels. Any questions feel free to contact me at robinbitsnpieces@gmail.com
Просмотров: 44 Robin Bitsnpieces
Three ways to remove the rivets
 
02:54
Three ways to remove the rivets
Просмотров: 618887 Cruzdelasadas technical
Corrugated Metal Fence with WOOD posts CHEAP fast EASY
 
12:22
See even more great ideas at www.CAmericaProjects.com Corrugated Metal Fence with Wooden Posts This is Craig for Capn America Projects. Thanks for joining us again. You might have seen one of our previous ideas, we showed you how to do a laminate fence. Now we are going to show you how to do a corrugated fence with wooden posts. So come along and join us in our adventure and we will put this fence up together. The first thing you want to do is run your strings when you are doing your fence. You want to make sure you have nice straight lines so what I did is I made a nice straight line from the corners of where the fence is going to go. That gives you a good idea of where to dig. Normally you would have the string several inches back before you dig. What I've done is made the string a couple of feet off the ground so that when I dig with my post hole digger I can line it up and dig it out as an angle and push the string back as I dig. The reason I'm doing it this way is that the neighbors have an old decayed fence and I don't ant to mess with taking it out. That is not my fence so I'm going to put my fence as close to that as I can and basically just hide that fence and if they ever want to take that out then that is great. Then they can enjoy the nice fence that I'm going to be putting up. Where the strings meet there just straight down from there and that will be the first hole. Lets get it started. I got my hole done and unfortunately I ran in to water. This is not something you want to have. The water is about 16 inches down. I dug my hole almost two feet down and then filled up to about the 6 inch mark. If I had some gravel I would put some gravel in there. That way the post isn't buried in water because that is definitely going to make the post rot quicker than I wanted to. I have eight foot poles. You want to go about two feet down and have 6 feet up because a typical residential fence is 6 feet tall. We have all of our posts cemented in. Lets have a look. If you notice on a couple of these I used some wood forms to help shape it in. That is because the ground was a little low here and I needed the cement to come above the ground a bit because I can only dig down so deep because of the water table. There you have our nice row of posts. Here is a quick tip. If you live in a cold wet climate then you want to wait longer for the cement to dry. Three days later. The next thing we are going to do is drill our holes in the metal and go ahead and mount the metal to the posts. Here we go. I like to drill my holes while the sheets are laying on the ground. I just put it on the grass and I can drill through easy instead of trying to drill while I'm putting them up. I'm going to go ahead and put my sheet in place and screw it in. What I'm using is these metal lave screws because they have a nice flat under part of the head that gives it alot of space to grip on to the other metal. The way I do it when I'm putting them in is I line up the two sheets of metal. Then I put in just the to[ screw on the next sheet I'm doing that way I can move it and level it. Then I come down to the next post and now since only the one screw is in then I can raise or lower this until I get it level. I'm judging level by the posts which are already level so you can eyeball it to make it in to a nice straight line and then screw it in. If you have soft wood you can start the screw by hand and then use the drill to finish it off. Then put in the rest of the screws. I have all of the bottom panels finished.Since we are at a wet climate I'm just going to put in the bottom sheets at first to wait longer to put more weight on the posts so that the cement can dry out a bit more. I will come back in about a week and put up the rest. I put the wood on the inside because I like to see the contrast of the wood against the metal. You can put the metal sheets on the inside if you prefer. A couple of weeks later. We now have all of the metal sheets on and you can see our whole fence here. I think it can out pretty nice. We have one more step we are going to do. This is a two man job so one person holds it at one end and the other person screws it in at the other. We did a little bit of overlap on all the metal about an inch to make it stronger. We have decided to put two by fours along the seams to make it look nice and also to make the fence stronger. I will pre drill the holes on the 2 x 4 . To do a good angle, you start going straight and then when you get in a little bit you angle it toward the final drill direction. I like to already start the screws before you put the board up so that they will be ll ready to go. Then I do the other side, same thing. Now we will screw in the 2 x 4. You need two people. One person holds one end and the other screws in the other end. We have the main structure of the fence done. Here you go, here is the final fence. Thanks for watching!
Просмотров: 20942 CAmericaProjects.com
How To Install Tile Trim - D.I.Y. At Bunnings
 
02:26
A tile trim is easy to install, protects the edges of your niche, and completes the look. Learn more at Bunnings Warehouse. For more D.I.Y. advice, and details about tools and materials for this project visit the Bunnings website: https://www.bunnings.com.au/diy-advice/home-improvement/tiles/how-to-fit-and-install-tile-trim Subscribe to the Bunnings YouTube Channel for more D.I.Y Advice: http://goo.gl/4amrTm
Просмотров: 186283 Bunnings Warehouse
pvc pipe,black metal tube,steel pipe sch 40,black carbon steel pipe
 
00:36
website:http://www.reliancemetalresource.com/ Tianjin Reliance Steel Pipe Industry & Trade Co., Ltd. was officially founded in 2004, and is located in Caigongzhuang Industrial Area in Jinghai County, Tianjin, China. We are a joint-stock enterprise, with 3 branch plants. Our main products are: Welded Pipes, Square & Rectangular Hollow Section Tubes Galvanized Steel Welded Pipe and Pre-galvanized Steel Pipes. Tel:(86) 189-2030-3008 Fax:(86) 022-23757190 E-mail:admin@reliancesteel.cn Address:Hi-Tech information square, NanKai district of Tianjin.
Просмотров: 52 Worldsou HK
How to install tile edge trim on walls: Schluter®-QUADEC profile
 
08:10
Let's get edgy! Discover our stunning wall profiles! Schluter®-QUADEC is a finishing and edge protection profile for outside corners of tiled surfaces. The reveal of the profile forms a square edge, providing a modern alternative to ceramic trim. QUADEC is available in a variety of different materials, finishes and colors so your options for design have no limits! The profile also features inside/outside corner pieces and connectors to help facilitate installation! So, check out the video above and get all the details on how to install Schluter® QUADEC! http://www.schluter.com/schluter-us/en_US/Profiles/For-Walls/Edging-%26-Outside-Wall-Corners/Schluter%C2%AE-QUADEC/p/QUADEC “For any questions you may have about this video and the installation of Schluter®-Systems products please call our customer service line: Canada: 1-800-667-8746 U.S.A: 1-800-472-4588 For further information please visit our website: http://www.schluter.com Subscribe to our channel: http://www.youtube.com/schlutersystems1 Facebook: https://www.facebook.com/schlutersystems “
Просмотров: 265676 Schluter-Systems North America
Removing A Stuck Bolt When All Else Fails
 
08:05
When you've got a bolt that has a rounded off head, it's hard, and very frustrating, to try to get it loose. On this stuck bolt, I tried a socket, vice grip pliers and even a pipe wrench, but couldn't get it off. Because the head was rounded off, and the position the bolt was in... well, I just couldn't get a good enough bite on it to loosen it. So... what to do? Well here is a great... last resort way... for removing a stuck, rounded-off bolt... when all else fails. Take care, alan Support My Channel for FREE by shopping on Amazon through THESE LINKS: http://amzn.to/2l7O6XW OR MY NEW AMAZON PAGE: https://www.amazon.com/shop/texasprepper2 ************* ALSO, Check out our YouTube Channel: https://www.youtube.com/user/texasprepper2 And click the link below to Subscribe to our Channel. Press the "BELL ICON" to get updated on the newest videos, and get informed when we add new content: https://www.youtube.com/user/texasprepper2?sub_confirmation=1 And remember, every week I upload new videos on the TexasPrepper2 Channel right here on YouTube: https://www.youtube.com/user/texasprepper2 ************* Here's a link to the PB B'laster I highly recommend: https://amzn.to/2J1AWXW Here's the link to a Lincoln AC225 Welder (crackerbox) : https://amzn.to/2ILJzlW CONNECT WITH US: FACEBOOK - https://www.facebook.com/TexasPrepper2/ TWITTER - https://twitter.com/TPrepper2 INSTAGRAM - https://www.instagram.com/Tprepper2/ ************* VISIT OUR SITES: https://www.youtube.com/user/texaspre... http://homesteadadvisor.com/ *************
Просмотров: 508028 TexasPrepper2