На главную
Видео добавленное пользователем “MakerMan”
Diy Vertical wind turbine | harvesting the wind | MakerMan
 
07:11
VAWT this project is an addition to my solar energy system, which i made few months ago. this is my first attempt on wind turbines. for my next wind energy project, i am planing to make a highly efficient axial generator with neodymium magnets. so stay tuned for that. in the future i might do more projects on different renewable energy. If someone wants an exclusive Skype or Whatsapp me with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. few months ago i have made a solar system for my house outside lighting here is that video. https://youtu.be/Cm1mTnC-ZLY ---------------------------------------------------------------------------------------------- music used 2BAD - Space Cake [FSTU Release] Support 2BAD: https://soundcloud.com/2bad-official https://www.facebook.com/2BaDOfficial/ ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 196717 MakerMan
Reclaimed Wood Lamp | DIY | Arduino project # 6
 
07:53
Made a lamp with a old wood piece which was cut 20 years ago. this was made for a friends parents. arduino was used as a touch switch, this was done simply by using a 470k ohm resistor as a sensor. here arduino code and wiring: http://j.gs/15530767/touch-file If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. -------------------------------------------------------------------------------------- Music Used:- Title: Indian Melody #2 Artist: Dj Shahmoney Genre: Hip Hop & Rap Download: https://goo.gl/eHMEmL -------------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------------
Просмотров: 12575 MakerMan
DIY X-Carve build for $170 |  CNC | Part2
 
06:39
To watch My latest Metal engraving Laser CNC, go to. https://goo.gl/V1o2tS ----------------------------------------------------------------------------------- There’s nothing more greater feeling than to owning your own CNC machine for your prototyping needs. But CNC machines can be super expensive for a school/college student as i am, the only next best option is for you to make your own CNC machine with recycled part like stepper motors from old industrial Xerox printers and using simple rotary bearings as the axis sliding mechanism. Here I have done exactly that. I got the inspiration from the popular CNC company called X-carve from inventables. took few months to build it. its way cheaper than X-Carve. the whole build cost around $170 any doubt about the building process comment down below. to see the CNC building process watch the part 1 https://youtu.be/FWM-Di2xk2M to see how i gave new life to old phone with the cnc watch this https://www.youtube.com/watch?v=DgNEdnwNdw8 to see the CNC dust collection enclosure https://youtu.be/V5U9ifiBRuU to see waste board flatting of this cnc https://youtu.be/EAfieVJVkXI ------------------------------------------------------------------------------ If someone want more information about this build, i have written a report and logbook for the whole build process. As this was my University final year project, lot of work into this. If someone wants it, all you have to pay 2$ and i will sent you. My PayPal account is shussainu@gmail.com and email me a copy of the receipt. Hope i am not asking much. This way you will help me grow my channel..... -------------------------------------------------------------------------------------- my patreon page https://www.patreon.com/makerman -------------------------------------------------------------------------------------- ================================= music used from http://www.looperman.com/ ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8XMm2BdbCwxF9O61UoMw
Просмотров: 134301 MakerMan
DIY Bench press - adjustable | bodybuilding
 
02:24
DIY Bench press - adjustable incline , flat , decline press If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. -------------------------------------------------------------------------------------- My other gym stuff DIY - Dip Stand And Squat Rack https://www.youtube.com/watch?v=kFb77D-h2_A DIY Forearm Roller - For Bigger Forearms https://www.youtube.com/watch?v=5WRKJMIrAlI DIY T-bar Row for bigger back https://www.youtube.com/watch?v=_sGlA1iXbvc full over view of my gym https://www.youtube.com/watch?v=JhuWBjT2Xmc
Просмотров: 78499 MakerMan
CNC Build From Scratch for 50$ | x-carve Inspired | MakerMan
 
10:47
To watch My latest Metal engraving Laser CNC, go to. https://goo.gl/V1o2tS ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- This was an experimental cnc machine that i have made for my brother with limited materials. This cnc machine was build in my home country, where tools and material was hard to come by. The structure is very minimalistic, so few material is required. This would be my 5th cnc machine to build. The cnc machine was build with recycled part like stepper motors from old printers and using simple rotary bearings as the axis sliding mechanism for the X and Z axis. 2 old inkjet printers were disassembled for it inner liner sliders, it then was combined together to become the Y axises sliding mechanism. The structure of the cnc machine was made from 3/4inch square tubings. Took around 15-20 day to build it, as most of the days went is hunting for parts. The whole build cost around $50 Any doubt about the building process comment down below. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- To see the my 3rd CNC i build few month ago which was an X-carve replica, one of my most viewed video on my channel. to watch links down below. 1- https://www.youtube.com/watch?v=FWM-Di2xk2M 2-https://www.youtube.com/watch?v=o2JfgmmYSw0 If someone want more information about this CNC build, i have written a report and logbook for the whole build process. As this was my University final year project, lot of work into this. If someone wants it, all you have to pay 2$ and i will sent you. My PayPal account is shussainu@gmail.com and email me a copy of the receipt. Hope i am not asking much. This way you will help me grow my channel..... ------------------------------------------------------------------------------- Music used from www.bensound.com http://www.bensound.com/royalty-free-music?download=scifi ------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 174663 MakerMan
WiFi Controlled Home Gate | iot project # 3
 
06:00
My latest iot project https://youtu.be/BTQvjaebseY In this video I added wifi to our home main gate with esp8622 module. the remote control didn't have enough range most of the times, so we always needed to come out of the the car and point the remote to the receiver for the gates to open. its was kinda annoying at times. here the wiring and code:- http://adf.ly/15530767/gate-code If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. comment down below for any questions. My other iot projects:- 1) WiFi Controlled Home Door Lock https://youtu.be/vYCLJtFv9lI 2) Wifi Controlled Air-conditioner https://www.youtube.com/watch?v=GhRqUdXQvUw 3) Door Status Notifier https://www.youtube.com/watch?v=7s0RQDi6wdo ------------------------------------------------------------------------------- For business enquiry email me at crx.ksa@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Music Used:- Title: Indian Riddim Artist: Dj Shahmoney Genre: Hip Hop & Rap Download: https://goo.gl/ZQWKeA Dj Shahmoney: https://soundcloud.com/djshahmoneybeatz https://www.facebook.com/djshahmoneyb... https://www.youtube.com/djshahmoneybeatz ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 30502 MakerMan
WiFi Home Door Lock| Blynk | iot project # 4
 
05:50
To see My latest iot project, link below https://youtu.be/BTQvjaebseY --------------------------- Here in this video, I added wifi to our home main door with esp8622 module. it locks the door and turns the attic lights on. the app used is called blynk. I am preparing a full set of instructions and plans to build your own iot lock for 5$. Anyone interested can send me an email on mustangcrx@gmail.com here the blink code for Arduino ide:- http://www.mediafire.com/file/69e09lojozlac89/Door+lock+blynkESP8266.rar --------------------------- My other iot projects:- 1) WiFi Controlled Home Gate https://www.youtube.com/watch?v=HrcsZrqysGs 2) Door Status Notifier https://www.youtube.com/watch?v=7s0RQDi6wdo 3) Wifi Controlled Air-conditioner https://www.youtube.com/watch?v=GhRqUdXQvUw If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------ For business enquiry email me at crx.ksa@gmail.com ------------------------------------------------------------------------ ------------------------------------------------------------------------ Music used - Vexento - Lonely Dance https://soundcloud.com/vexento/vexent... https://twitter.com/Vexento https://soundcloud.com/vexento/tracks ------------------------------------------------------------------------ stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------ Support me by purchasing a t shirt. https://goo.gl/wv2Hbr ------------------------------------------------------------------------
Просмотров: 242785 MakerMan
Laser Cutter Restoration with an arduino | MakerMan
 
07:02
I found a 14 year old laser cutting from the junkyard. The machine is 350kg , so a crane was used bring it to my home. It had missing laser tube, power supply, air-blower, compressor, water cooler and a broken control broad. So i used an arduino nano running grbl to control it. The water cooler was made from bilge pump. The whole restoration took more than a month as in got busy with other work. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- music used - Vexento - Home Music Link ➞ https://youtu.be/eDrkT54cwzY Artist SC ➞ https://soundcloud.com/vexento Music Provided by Chill Royalty Free Music https://goo.gl/5NfMV4 ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 8751 MakerMan
DIY Laser engraving CNC | Part 2 | OPT Lasers | MakerMan
 
05:29
Here is the part 2 video of the laser cnc i made a few weeks ago, this video show some of the many things that can be done with this laser cnc. The laser module is PLH3D-6W-XF which is a professional engraving laser head from a company called Opt Lasers, which can engrave materials like Stainless steel, Painted metal, wood and etc. This laser module has the power to cut acrylic also. here is the link to see how this laser cnc was build https://youtu.be/Vjrh4fSkfWs If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- here is the link to the PLH3D-6W-XF laser head https://goo.gl/8LJuoF !!LIMITED OFFER!! use "MakerMan" promo Code and get 30USD discount for your order from Opt Lasers. here is the link to Opt Lasers youtube channel https://goo.gl/u5DgEU ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- This would be my 6th cnc machine to build.The cnc machine was build with recycled part like stepper motors and linear rods from old printers. Took around 30 days to build it, as most of the days went is hunting for parts. Any doubt about the building process comment down below. ------------------------------------------------------------------------------- To see the my 3rd CNC i build few month ago which was an X-carve replica, one of my most viewed video on my channel. to watch links down below. 1- https://www.youtube.com/watch?v=FWM-Di2xk2M 2-https://www.youtube.com/watch?v=o2JfgmmYSw0 To see the my 5th CNC which was Build From Scratch for 50$ https://www.youtube.com/watch?v=oyGropP6gcU ------------------------------------------------------------------------------ music used - Vexento - Never Letting Go https://soundcloud.com/vexento/never-... https://twitter.com/Vexento https://soundcloud.com/vexento/tracks http://vexentomusic.com/ ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 8196 MakerMan
Diy Door Status Notifier | Iot project # 2
 
03:46
My latest iot project https://youtu.be/BTQvjaebseY made a notifier to know if someone enters my room. it made with esp8622 module which has a build in wifi. the battery should last for 6 month or so. wiring and esp8622 code http://adf.ly/15530767/notifier comment down below for any questions. My other iot projects:- 1) WiFi Controlled Home Gate https://www.youtube.com/watch?v=HrcsZrqysGs 2) WiFi Controlled Home Door Lock https://youtu.be/vYCLJtFv9lI 3) WiFi Controlled Air-conditioner https://www.youtube.com/watch?v=GhRqUdXQvUw ------------------------------------------------------------------------------- music used Ason ID - Colours Genre: EDM https://soundcloud.com/ason-music/aso... ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 9588 MakerMan
Welding Cart Made From Scrap
 
04:53
Welding Cart Made From Scrap | DIY i made this welding cart for my new mid welder and my old stick welding machine. i used scarp materials and thing i found laying around my house, like wheels from an old bicycle and some pipes from an old broken trolley. this took 2 days to build. i don't have an exact plan for this build, as this was yet again a "go with the flow kinda build :)" but if anyone have any question post down at the comments. If someone wants an exclusive Skype or Whatsapp me with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ============================================= Disclaimer Use safety protection while welding. i am MakerMan thats why sometime i dont wear safety protections ;) . ============================================= music used :- Not For Nothing - from YouTube music library ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8...
Просмотров: 23077 MakerMan
DIY Aquaponics with Solar system | MakerMan
 
07:26
this was a 2 day project for my fish tank, which was buried under-ground few years ago. the tank was initially a secondary tank for the house but then was replace with a bigger tank and this was left unused for some years, so i decided to have some small fish's in it. in this aquponics system i have made a timer from arduino which turns ON the bildge pump for a minute and then turns OFF the pump for an hour (the code boot on the arduino is just a modified "blink" code). Under the plant grow bed their is a flow value to adjust the drain water flow, so kinda acts like having a siphon value. the battery of the system is an old car battery. -- ---------------------------------------------------------------------------------------------- jazz used "Jazz in Paris" by Media Right Productions from YouTube Audio Library. ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 2248 MakerMan
DIY X-Carve for $170 | CNC | Waste board flattening
 
02:19
did a waste board flattening on my DIY X-carve cnc. used 12mm flat bit. took 2 hours to cut. ------------------------------------------------------------------------------------ latest video on the cnc https://www.youtube.com/watch?v=DgNEdnwNdw8 ----------------------------------------------------------------------------------- ------------------------------------------------------------------------------------ There’s nothing more greater feeling than to owning your own CNC machine for your prototyping needs. But CNC machines can be super expensive for a school/college student as i am, the only next best option is for you to make your own CNC machine with recycled part like stepper motors from old industrial Xerox printers and using simple rotary bearings as the axis sliding mechanism. Here I have done exactly that. I got the inspiration from the popular CNC company called X-carve from inventables. my cnc took few months to build it. its way cheaper than X-Carve. the whole build cost around $170 any doubt about the building process comment down below. to see the CNC building process watch the part 1 https://youtu.be/FWM-Di2xk2M to see the CNC in action watch the part 2 https://youtu.be/o2JfgmmYSw0 to see how i gave new life to old phone with cnc. watch this https://www.youtube.com/watch?v=DgNEdnwNdw8 to see the CNC dust collection enclosure https://youtu.be/V5U9ifiBRuU ------------------------------------------------------------------------------ If someone want more information about this CNC build, i have written a report and logbook for the whole build process. As this was my University final year project, lot of work into this. If someone wants it, all you have to pay 2$ and i will sent you. My PayPal account is shussainu@gmail.com and email me a copy of the receipt. Hope i am not asking much. This way you will help me grow my channel..... ------------------------------------------------------------------------------------ music used - Watch "Papa Ya - Sunny [ Non-Copyrighted Music ]" https://www.youtube.com/watch?v=lBiNE54n6kI ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 13581 MakerMan
Garage Door Opener | DIY
 
08:22
this is a modification done to my garage door as the door is quite heavy to open and close, so i hacked it and motorized it with old 2hp single phase ac motor and a reduction gear box which i got from the scrapyard. i was planing to add a remote to open and close the door but got busy to the end of this project but i will do that soon. this project was inspired by " make it extreme " channel. this project took 4 days in total to complete where 2 days was just for wiring as the motor used was a 4 pole single phase motor and there wasn't any info on the internet, so it took some time to figure it out. if anyone have any question leave a comment. If someone wants an exclusive Skype or WhatsApp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ============================================ Disclaimer Use safety protection while welding. i am MakerMan thats why sometime i dont wear safety protections ;) . ============================================ -------------------------------------------------------------------------------------- music used:- Song: Elektronomia - Sky High [NCS Release] Music provided by NoCopyrightSounds. Video Link: https://youtu.be/TW9d8vYrVFQ Download Link: https://NCS.lnk.to/SkyHigh -------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman -------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... --------------------------------------------------------------------------------------
Просмотров: 10864 MakerMan
DIY Metal engraving 6watts Laser CNC | OPT Lasers | MakerMan
 
13:55
Here is a laser cnc i made which can engrave materials like Stainless steel, Painted metal, wood and etc. this laser has the power to cut acrylic also. The laser module is PLH3D-6W-XF professional engraving laser head from a company called Opt Lasers. part 2 of this laser cnc, here is the link https://goo.gl/V1o2tS This video show some of the many things that can be done with this laser cnc. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- here is the link to the PLH3D-6W-XF laser head https://goo.gl/8LJuoF !!LIMITED OFFER!! use "MakerMan" promo Code and get 30USD discount for your order from Opt Lasers. here is the link to Opt Lasers youtube channel https://goo.gl/u5DgEU ------------------------------------------------------------------------------- here is the link to the 3d printed part file http://www.mediafire.com/file/c4bbluwkb0h2mzw/LASER_CNC%20v3%20v0.f3d (this was designed and printed by my friend ) go visit him, he my cool stuffs. https://goo.gl/ngZDFL ------------------------------------------------------------------------------- For business enquiry email me at crx.ksa@gmail.com ------------------------------------------------------------------------------- This would be my 6th cnc machine to build.The cnc machine was build with recycled part like stepper motors and linear rods from old printers. Took around 30 days to build it, as most of the days went is hunting for parts. Any doubt about the building process comment down below. ------------------------------------------------------------------------------- To see the my 3rd CNC i build few month ago which was an X-carve replica, one of my most viewed video on my channel. to watch links down below. 1- https://www.youtube.com/watch?v=FWM-Di2xk2M 2-https://www.youtube.com/watch?v=o2JfgmmYSw0 To see the my 5th CNC which was Build From Scratch for 50$ https://www.youtube.com/watch?v=oyGropP6gcU ------------------------------------------------------------------------------- music used L3V3LS - A War Song Download: https://soundcloud.com/outertone/l3v3... ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://teespring.com/makerman-white-t-shirts
Просмотров: 54475 MakerMan
HomeMade Weighing Scale Machine | Arduino Project #4
 
07:48
​Here is the video of the whole build process, where i start with constructing the frame for the weighing scale and to the end integrating arduino. the scale is simply powered by an old power bank. Made a Weighing Scale with a capacity of 200kg. the structure was made from steel laying around. the whole build took 2 days to complete, as the paint took much longer to dry. Arduino was used in this project, here is the code for the arduino. http://textuploader.com/dou7o Components used:- Arduino LCD 16x2 Hx711 Module LoadCell 200kg 5volt power bank and some wires If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Music used: The Complex Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ -------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 50640 MakerMan
DIY Forearm Roller - For Bigger Forearms
 
02:26
DIY Forearm Roller Home-made Low cost gym equipment. One of the best old-school forearm exercising machine. Made from scrap materials.Took 3 hours to make it. My other gym stuff DIY Bench press - adjustable ==== https://www.youtube.com/watch?v=XKy4bD_fXoM DIY - Dip Stand And Squat Rack ==== https://www.youtube.com/watch?v=kFb77D-h2_A DIY T-bar Row for bigger back==== https://www.youtube.com/watch?v=_sGlA1iXbvc full over view of my gym https://www.youtube.com/watch?v=JhuWBjT2Xmc Care To Subscribe and like! ------------------------------------------------------------------------------------------------- song used: Hot and Heat from youtube liberary
Просмотров: 6654 MakerMan
PSP Restoration , I got it for 2$ | MakerMan
 
07:13
I got a PSP 1001 for 2$ from my local flea market, i decided to clean it up. I did a complete teardown and rebuild on it. the housing of the psp was order from china. it took an hour to finish. LONG LIVE THE PSP !!! If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- Music used Title: Sparks Artist: Chaël Genre: Dance & Electronic Mood: Calm Download: https://goo.gl/t2atoU Sparks by Chaël https://soundcloud.com/chael_music Creative Commons — Attribution 3.0 Unported — CC BY 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library https://youtu.be/XIoyEFrDRDo ------------------------------------------------------------------------------- Stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 2130 MakerMan
DIY  T-bar Row for bigger back
 
02:43
Home made T-bar Row. This exercise is one of the best for getting that V-shape back. Made from scarp materials, things that was laying around. Took two days to make it. DIY Forearm Roller Home-made Low cost gym equipment. One of the best old-school forearm exercising machine. Made from scrap materials.Took 3 hours to make it. My other gym stuff DIY Bench press - adjustable ==== https://www.youtube.com/watch?v=XKy4b... DIY - Dip Stand And Squat Rack ==== https://www.youtube.com/watch?v=kFb77... DIY Forearm Roller - For Bigger ==== Forearmshttps://www.youtube.com/edit?video_id=5WRKJMIrAlI full over view of my gym https://www.youtube.com/watch?v=JhuWB... Care To Subscribe and like! ----------------------------------------­----------------------------------------­---------------- song used: Magic Marker from YouTube Audio Library
Просмотров: 15647 MakerMan
DIY Mini Power Wall | MakerMan
 
06:34
Made my first power wall using old laptop battery which are new battery but from an older model laptops. This is my first experiment to power wall builds. The whole build took few hours. Next would be a much bigger than this. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- Music used Ghost'n'Ghost - Spooky Thoughts by Argofox: https://youtu.be/WvwOpH7o8nQ ------------------------------------------------------------------------------- Stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 38842 MakerMan
HoverBoard to Roller Skate electric Booster | MakerMan
 
10:11
In this video, i am making a roller skate electric booster. I recently got an old hoverboard which had a dead battery and a broken chassis. So decide to make a roller skate electric booster, as me and my brother skates. The hoverboards battery had some dead cell in it which was replaced by some 18650 laptop battery cells. For speed controller i am using a 350Watt 36volt e-bike brushless motor controller. the whole build 4 days to complete. I have one more wheel hub motor left from this hoverboard. So one more project in the near future. Stay tuned. If someone wants an exclusive Skype or Whatsapp me with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Music Used:- Song: Dizaro - Hawaii (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/JZ-Vw99HfRk ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 18570 MakerMan
Diy X-carve project | New life to old mobile phones
 
04:48
Remember the good old days of having a nokia N900, they don’t make phones like that anymore. here I have made a signboard of my logo with an old n900 mobile attach to it which is running 24 7. i have under-clocked it so that it consumes less power. I am using an old nokia n900 as a screen to show live YouTube status of my channel using live real time YouTube on the browser. the logo it milled in a diy cnc, I build few months ago, this project took 4-5 days to complete as to the end the phone had some issue which needed to be fixed. the milling process took 1.5 hours to make the logo. to the end of the video, the is time-lapse of the screen running for 4 hour which shows live subscriber count. Big announcement i made to hack a day. http://hackaday.com/2017/02/04/live-counter-revives-old-nokia-phones-utility/#comments ------------------------------------------------------------------------------------ There’s nothing more greater feeling than to owning your own CNC machine for your prototyping needs. But CNC machines can be super expensive for a school/college student as i am, the only next best option is for you to make your own CNC machine with recycled part like stepper motors from old industrial Xerox printers and using simple rotary bearings as the axis sliding mechanism. Here I have done exactly that. I got the inspiration from the popular CNC company called X-carve from inventables. my cnc took few months to build it. its way cheaper than X-Carve. the whole build cost around $170 any doubt about the building process comment down below. to see the CNC building process watch the part 1 https://youtu.be/FWM-Di2xk2M to see the CNC in action watch the part 2 https://youtu.be/o2JfgmmYSw0 to see the CNC dust collection enclosure https://youtu.be/V5U9ifiBRuU to see waste board flatting of this cnc https://youtu.be/EAfieVJVkXI ------------------------------------------------------------------------------ if someone want more information about this build, i have written a report and logbook for the whole build process. if someone want it all u have to do is to share my youtube channel (https://www.youtube.com/c/makerman) link on your Facebook and sent that post to my email (crx.ksa@gmail.com) and i will sent you. i hope i am not asking too much. this way you will help me grow my channel and i will also help you back in your cnc build. music used - In_a_Heartbeat from youtube creator ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 9375 MakerMan
Air Conditioner Auto-Off timer | Arduino Project # 3
 
04:52
Made a timer to turn off my air conditioner after a few hours of use, as the room get extreme cold. took a day to complete it. arduino code:- https://justpaste.it/16yt2 if somebody wants to write a better code, plz do and sent it to mustangcrx@gmail.com i will post it here. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. music used:- Song: Sloth Punch & Kunstig - Climbing Video link: https://youtu.be/xgOlk-Si_Zg Download / Stream: zeroclaim.fanlink.to/climbing -------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... --------------------------------------------------------------------------------------
Просмотров: 3265 MakerMan
DIY Wifi Controlled Air-conditioner | Iot project # 1
 
04:01
My latest iot project https://youtu.be/BTQvjaebseY i have recently brought a new Air-conditioner for my room, it get very cold after a few hours so i decided to to add a timer but then though i want to control it using phone. so that in can keep the room chilled even when i am in my car using my phone. this is very useful on a hot sunny day. this was done by using esp8622 module which has a build in wifi. wiring and the arduino and esp8622 code http://adf.ly/15530767/esp8633-code comment down below for any questions. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. My other iot projects:- 1) WiFi Controlled Home Gate https://www.youtube.com/watch?v=HrcsZrqysGs 2) Door Status Notifier https://www.youtube.com/watch?v=7s0RQDi6wdo 3) WiFi Controlled Home Door Lock https://youtu.be/vYCLJtFv9lI ------------------------------------------------------------------------------- For business enquiry email me at crx.ksa@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- music used • Title: Xander • Artist: Ason ID • Genre: Dance & Electronic • Mood: Bright • Download: https://goo.gl/sz3kDs ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 10181 MakerMan
DIY X-Carve for $170 | CNC | Dust collection enclosure
 
04:32
To watch My latest Metal engraving Laser CNC, go to. https://goo.gl/V1o2tS ------------------------------------------------------------------------------------ here is a dust collection system i made for my cnc. it took few hours to build it, the materials used are old plywood and mdf which are leftover form other projects. ------------------------------------------------------------------------------------ There’s nothing more greater feeling than to owning your own CNC machine for your prototyping needs. But CNC machines can be super expensive for a school/college student as i am, the only next best option is for you to make your own CNC machine with recycled part like stepper motors from old industrial Xerox printers and using simple rotary bearings as the axis sliding mechanism. Here I have done exactly that. I got the inspiration from the popular CNC company called X-carve from inventables. my cnc took few months to build it. its way cheaper than X-Carve. the whole build cost around $170 any doubt about the building process comment down below. to see the CNC building process watch the part 1 https://youtu.be/FWM-Di2xk2M to see the CNC in action watch the part 2 https://youtu.be/o2JfgmmYSw0 to see how i gave new life to old phone watch this https://www.youtube.com/watch?v=DgNEdnwNdw8 to see waste board flatting of this cnc https://youtu.be/EAfieVJVkXI ------------------------------------------------------------------------------ If someone want more information about this build, i have written a report and logbook for the whole build process. As this was my University final year project, lot of work into this. If someone wants it, all you have to pay 2$ and i will sent you. My PayPal account is shussainu@gmail.com and email me a copy of the receipt. Hope i am not asking much. This way you will help me grow my channel..... ------------------------------------------------------------------------------------ music used - Jim Yosef - Firefly [NCS Release] Support on iTunes: http://apple.co/1V2ZRbq Download this track for FREE: http://bit.ly/fireflyjimyosef Listen on Spotify: http://spoti.fi/1I2oWj4 Listen on SoundCloud: [coming] ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ Support on my patreon page https://www.patreon.com/makerman ------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------
Просмотров: 5912 MakerMan
DIY X-Carve build for $170 |  CNC | Part 1
 
10:28
To watch My latest Metal engraving Laser CNC, go to. https://youtu.be/Vjrh4fSkfWs ------------------------------------------------------------------------------- There’s nothing more greater feeling than to owning your own CNC machine for your prototyping needs. But CNC machines can be super expensive for a school/college student as i am, the only next best option is for you to make your own CNC machine with recycled part like stepper motors from old industrial Xerox printers and using simple rotary bearings as the axis sliding mechanism. Here I have done exactly that. I got the inspiration from the popular CNC company called X-carve from inventables. took few months to build it. its way cheaper than X-Carve. the whole build cost around $170 any doubt about the building process comment down below. to see the CNC in action watch the part 2 https://youtu.be/o2JfgmmYSw0 to see how i gave new life to old phone watch this https://www.youtube.com/watch?v=DgNEdnwNdw8 to see the CNC dust collection enclosure https://youtu.be/V5U9ifiBRuU to see waste board flatting of this cnc https://youtu.be/EAfieVJVkXI ------------------------------------------------------------------------------ If someone want more information about this build, i have written a report and logbook for the whole build process. As this was my University final year project, lot of work into this. If someone wants it, all you have to pay 2$ and i will sent you. My PayPal account is shussainu@gmail.com and email me a copy of the receipt. Hope i am not asking much. This way you will help me grow my channel..... -------------------------------------------------------------------------------------- Support me buy by purchasing a t shirt. https://teespring.com/makerman-white-t-shirts -------------------------------------------------------------------------------------- ================================= music used from http://www.looperman.com/ ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8XMm2BdbCwxF9O61UoMw
Просмотров: 637378 MakerMan
DIY | Solar home lighting setup | Off-the-grid | UAE
 
05:31
this is my home free energy solar setup to power led light around the house. Total cost of this project 500AED = 130$ Electricity bill saved per month 200AED = 55$ Instructable link http://www.instructables.com/id/Solar-Outdoor-Light-Setup-With-Out-Car-Batteries/ =============================================== song used Cartoon - On & On but edited by me https://www.youtube.com/watch?v=K4DyB...
Просмотров: 2232 MakerMan
How to build an Electric bike | by a 6 year old
 
07:57
Electric tri-bike built by 6 year old took 4 days to make this Electric tri-bike, made with an old broken electric scooter. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. music used Warriyo - Mortals (feat. Laura Brehm) [NCS Release] edited by me to remove the vocals (much respect to the person who sang though) ======== disclaimer ========= the whole build was done with adult supervision in using tools. ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8...
Просмотров: 3516 MakerMan
Kinetic Moving Chandelier | MakerMan
 
06:15
This was a prototype project of a moving chandelier developed for a client. The structure of the chandelier is an origami flower. There is a geared stepper motor controlled with an arduino to move up and down. The video was made with short clip taken from my phone and edited. Sorry for the shaky footage. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Music used: Song: Ehrling - Sthlm Sunset (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: https://youtu.be/5xrLZ1kcC90 ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 3413 MakerMan
How to make Flappy Birds console | Arduino Project # 2
 
02:55
made a flappy bird game console with very few components. the whole build took more or less than 30min. this was made for my nephew. i have uploaded all the file to host. here u can download my arduino code and the libraries used 1 - flappy birds arduino code - http://adf.ly/1ikF51 2 - LCD library - http://adf.ly/1ikF51 3- wiring - http://adf.ly/1ikFOb Once you are done Connecting the module to the Arduino, so that the pins are inserted properly into the Arduino. The program for testing the module is given below. In-order to run the module we need to libraries into the Arduino software. ---------------------------------------------------------------------------------------------- music used Kontinuum - Aware NCS Release https://www.youtube.com/watch?v=QiKHfaVSJvE ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 7121 MakerMan
Mustang 05-09 headlight replacement | Halogen to LED swap
 
02:44
a short video of replacing my cars head lights with a 55Watt LED . took 30 minutes to change the head lights. If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. -------------------------------------------------------------------------------------- music used Alan Walker - 135 https://www.youtube.com/watch?v=mlaxs1Ur-NU -------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... --------------------------------------------------------------------------------------
Просмотров: 3154 MakerMan
DIY  | How to make Outdoor Hammock Stand
 
07:15
DIY | How to make Outdoor Hammock Stand Made this in a day with old materials laying around house If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8XMm2BdbCwxF9O61UoMw ---------------------------------------------------- Music used - SunnYz - Victory - Listen on Spotify: https://open.spotify.com/track/2Uef6y... - Support on iTunes: https://freesongstouse.lnk.to/victoryID - Free Download: https://soundcloud.com/freesongstouse...
Просмотров: 3228 MakerMan
Uni-Rover | The whole build | Skype robot | Part 1
 
06:06
it took us 2.5 months to make this rover for Emirates aviation university HND project. ----------------------------------------------------------------------------------------- song used Royalty Free Music | Epic Dramatic | Background Music Listen this track on Soundcloud: http://bit.ly/1R2RqcU FREE SoundCloud Promotion! - http://goo.gl/JJVs4o _____________________________ e-soundtrax on Twitter: http://bit.ly/1I3Dkll e-soundtrax on Facebook: http://on.fb.me/1Hvr9BO e-soundtrax on Soundcloud: http://bit.ly/1TdGrji e-soundtrax Website: http://bit.ly/1Fb0lkd Visit my music portfolio on audiojungle: http://bit.ly/1noccrT _____________________________
Просмотров: 1368 MakerMan
Diy Custom Desk PC | The Ryzen Build | MakerMan
 
10:03
i upgraded my PC for better video rendering, i went with the AMD Ryzen 7 as it has more performance to price ratio. I made a custom desk for the PC with a removable setup like a drawer. So i can take it with me on the go. The whole build took 2 days. My new PC specification :- Amd Ryzen 7 1800X ASUS Prime X370-Pro Motherboard ASUS GeForce GTX 1070 8GB ROG STRIX Crucial ballistix sport 16gb ddr4 ram Crucial MX300 275GB SATA M.2 Cooler Master: Hyper 212 EVO Seagate 4TB BarraCuda SATA Kingwin ABT-650MM power supply ------------------------------------------------------------------------------- If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- Musics used [No Copyright Music] Bay Breeze - FortyThr33 Artist: FortyThr33 Genre: Dance & Electronic Mood: Bright Download: https://goo.gl/HCmgSQ [No Copyright Music] Island by MBB Artist: MBB Genre: Dance & Electronic Mood: Bright Download: https://goo.gl/7JUMdN ------------------------------------------------------------------------------- Stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 11175 MakerMan
DIY - Dip Stand And Squat Rack
 
02:25
DIY - ( Home Made ) Dip Stand And Squat Rack for may home project. Made from scarp materials, things that was laying around. It took 3-4 hours to make this from start to finish. My other gym stuff DIY Bench press - adjustable ==== https://www.youtube.com/watch?v=XKy4bD_fXoM DIY Forearm Roller - For Bigger Forearms ==== https://www.youtube.com/watch?v=5WRKJMIrAlI DIY T-bar Row for bigger back==== https://www.youtube.com/watch?v=_sGlA1iXbvc full over view of my gym https://www.youtube.com/watch?v=JhuWBjT2Xmc Care To Subscribe and like! ----------------------------------------------------------------------------------------------- Song used: Song: Droideka - Plethora Droideka's channel: http://www.youtube.com/user/DoidekaDUB Download this song for free: http://www.mediafire.com/download/5w3...
Просмотров: 17697 MakerMan
ROV-E | RC Tank-less Submarine | ROV Project
 
07:09
ROV-E | RC Tank-less Submarine | Beng Project | EAU it took us 4 months to build it. ================================ music used Goblins from Mars - Genie https://soundcloud.com/goblinsfrommar...
Просмотров: 1550 MakerMan
wood lathe machine
 
05:28
wood lathe machine
Просмотров: 1660 MakerMan
Keto Pizza without carbs | MakerMan
 
03:06
This is my first cooking video, where i made a pepperoni pizza without using using any flour for crust instead I used mozzarella cheese. The whole pizza has only 1200 calories compared a pizza with flour crust which is around 3000-3500 calories. My large keto Pizza without flour crust - Calorie breakdown: 70% fat, 5% carbs, 25% protein. A large Pizza with flour crust - Calorie breakdown: 30% fat, 60% carbs, 10% protein. -------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... -------------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 740 MakerMan
Band Saw Restoration | MakerMan
 
06:59
I got this BandSaw from my local junkyard. It was missing the work table which i fabricated. The motor mount was not aligned as the blade was slipping often and the rubber rim was also missing, it was fixed by adding some good quality insulation tape. A bit of cleaning and some love gave it a new life in my workroom. See some of my other Restoration down below:- 1) Laser Cutter Restoration https://www.youtube.com/watch?v=D7AweNwrrN0 2) Bench Grinder Restoration https://www.youtube.com/watch?v=H7ptlg0Sl7M 3) Drill Press Restoration https://www.youtube.com/watch?v=zWhb-I0XApc 4) PSP Restoration https://www.youtube.com/watch?v=jqczrcTkRQw -------------------------------------------------------------------------------------- Music Used Exit the Premises Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ -------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 639 MakerMan
DIY- PlayStation custom arcade | The whole build
 
08:34
it took 2 weeks to make this coin operated play-station one arcade machine. there are around 60 games. the full overview video https://youtu.be/GhzKqlufabs the arcade coin timer made by my brother and adam byers https://adambyers.com/ If someone wants an exclusive Skype or Whatsapp me with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. -------------------------------------------------------------------------------------- song used Alan Walker - Fade Support on iTunes: http://smarturl.it/ncsuplifting Free Download @ https://soundcloud.com/alanwalkermusi... Facebook https://www.facebook.com/DJWalkzz link to the video: https://www.youtube.com/watch?v=bM7SZ5SBzyY
Просмотров: 25089 MakerMan
Work Room Upgrading | MakerMan
 
02:12
added a second work table. ----------------------------------------------------------------- Song Used Different Heaven - Nekozilla [NCS Release] Download this track for FREE: http://bit.ly/different_heaven_nekozilla Support on iTunes: http://apple.co/1MSj3Fv Listen on Spotify: http://spoti.fi/1OTcH7e Listen on SoundCloud: https://soundcloud.com/nocopyrightsou...
Просмотров: 185 MakerMan
Broken Tile to YouTube button | thank-you 2000+ subscribers
 
04:43
this is a video that in made for my 2000+ subscribers. it is made out of old broken tiles. i will be making like this play button, when i hit every milestones. next wound be at 5000 subs. so tell me know with what material i should make the next one. comment down below. ---------------------------------------------------------------------------------------------- music used Cold Funk Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ ---------------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman ----------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------------------------
Просмотров: 548 MakerMan
Copy-Jack Plus | Restoration | handheld vintage copy machine | 1980's
 
11:58
Copy-Jack Plus Restoration handheld vintage copy machine which i got from the junkyard My Instructables link http://www.instructables.com/id/Copy-Jack-Plus-Restoration-Handheld-Vintage-Copy-M/ history of this machine http://www.nytimes.com/1986/09/12/style/a-lightweight-copier-to-go.html ---------------------------------------------------------------- song used LeCube - Olympus https://www.youtube.com/watch?v=5cnB3wrL-Og
Просмотров: 909 MakerMan
DiY Telepresence Rover with Huawei Mate 20 Pro | iot project # 5 | MakerMan
 
09:05
This is a telepresence rover, i just made which can be controlled through blynk and uses skype for the video feed. i have made many such telepresence rover, this would be 6th version. This video is Sponsored by Huawei's new Mate 20 Pro which is an awesome phone with a lot of features. This is the 5th iot project incorporating the blynk app. This rover can be operated from anywhere in the world using skype auto answer function. I am preparing a full set of instructions and plans to build your own rover by yourself for 5$. Anyone interested can send me an email on mustangcrx@gmail.com Here the blink code for this rover:- https://www.mediafire.com/file/7aqgz5eeap8vlgl/crxbot_v2.zip ------------------------------------------------------------------------ My other iot projects:- 1) WiFi Controlled Home Door Lock https://youtu.be/vYCLJtFv9lI 2) WiFi Controlled Home Gate https://www.youtube.com/watch?v=HrcsZrqysGs 3) Door Status Notifier https://www.youtube.com/watch?v=7s0RQDi6wdo 4) Wifi Controlled Air-conditioner https://www.youtube.com/watch?v=GhRqUdXQvUw ------------------------------------------------------------------------ ------------------------------------------------------------------------ If someone wants an exclusive Skype or Whatsapp call me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------ For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------ ------------------------------------------------------------------------ Music used - Skylike - Dawn Link: https://youtu.be/Jg9nDEtqWV0 https://soundcloud.com/skylike https://www.instagram.com/skylikeoffi... https://twitter.com/SkylikeMusic ------------------------------------------------------------------------ stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------ Support me by purchasing a t shirt. https://goo.gl/wv2Hbr ------------------------------------------------------------------------ #Huawei mate 2 pro camera, #best phone of 2018, #technology, #full review, #unboxing, #huawei phone, #Huawei mate 2 pro review, #Huawei mate 2 pro
Просмотров: 1602 MakerMan
2 Axis Motorized camera slider for 20$ | DIY | Arduino project#5
 
07:51
i have made a 2 axis motorized camera slider to take timelapse, panorama and in focus footages. i am using nema 23 which was salvaged from old industrial printers. arduino with 2 easydrivers was used to control the stepper motors. there 5 push switches and pot for the speed. the whole took 2 days. here arduino code and wiring: http://adf.ly/1o26H2 If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. ------------------------------------------------------------------------------- For business enquiry email me at mustangcrx@gmail.com ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- music used: Queen of the Night (Royalty Free Music) [CC-BY] Download mp3 at: https://machinimasound.com/music/quee... License: https://machinimasound.com/license ------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 3058 MakerMan
A Bench Grinder Restoration | MakerMan
 
05:15
i got the grinder from junkyard. it was missing a tool rest and was rested. a bit sanding and some paint gave it a new life in my workroom. See some of my other Restoration down below:- 1) Band saw Restoration https://youtu.be/M1D0792Am0M 2) Laser Cutter Restoration https://www.youtube.com/watch?v=D7AweNwrrN0 3) Drill Press Restoration https://www.youtube.com/watch?v=zWhb-I0XApc 4) PSP Restoration https://www.youtube.com/watch?v=jqczrcTkRQw If someone wants an exclusive Skype or Whatsapp with me for an hour. All you have to donate 10$ to my PayPal account shussainu@gmail.com . This will allow me to grow my channel and bring out new project like this. -------------------------------------------------------------------------------------- music used Cinematic Background Music For Videos (No Copyright Music) Download - by AShamaluevMusic https://www.youtube.com/watch?v=6Sq5Y2HzF1c -------------------------------------------------------------------------------------- Support on my patreon page https://www.patreon.com/makerman -------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------- awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... --------------------------------------------------------------------------------------
Просмотров: 54024 MakerMan
Home Made Wheel Barrel | MakerMan
 
03:18
made from recycled materials took 3 days to finsh. ---------------------------------------------------------------------------- song used Tobu - Colors [NCS Release] Free Download @ http://bit.ly/tobu_colors NCS Spotify: http://bit.ly/SpotifyNCS
Просмотров: 805 MakerMan
adding a usb port to epad
 
02:57
adding a usb port to epad crx.ksa@gmail.com
Просмотров: 138 MakerMan
DIY Home Made Gym
 
02:45
DIY Home Gym Made from scarp materials, things that was laying around. My other gym stuff DIY Bench press - adjustable ==== https://www.youtube.com/watch?v=XKy4bD_fXoM DIY - Dip Stand And Squat Rack ==== https://www.youtube.com/watch?v=kFb77D-h2_A DIY Forearm Roller - For Bigger Forearms ==== https://www.youtube.com/watch?v=5WRKJMIrAlI DIY T-bar Row for bigger back==== https://www.youtube.com/watch?v=_sGlA1iXbvc Care To Subscribe and like! ----------------------------------------------------------------------------------------------- Song used: Artist : DJ ASSASS1N Track :Frag Out ★♫DOWNLOAD Link ♬★ http://gamerslandingzone.com/index.ph...
Просмотров: 1910 MakerMan
Making YouTube button from steel | Thank you 5000+ Subscribers | MakerMan
 
04:54
This is a video that i made for my 5000+ subscribers milestone. Its made out of wood laying around. I will be making play buttons with different materials, when i hit my future milestones. Next wound be at 10000 subs. So let me know with what material, I should make the next one. Comment down below. To see what i made for 2000+ subscribers milestone https://goo.gl/VzJKSP ------------------------------------------------------------------------------ music used Instrumental produced by Chuki. http://www.youtube.com/user/CHUKImusic ------------------------------------------------------------------------------ awesome intro was made by ThatKaiGuy https://www.youtube.com/channel/UCYh8... ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- stay connected with me in: Instagram: https://goo.gl/FfwwnB Facebook: https://goo.gl/yLZYTn to see small projects which not uploaded in this channel. ------------------------------------------------------------------------------- Support me by purchasing a t shirt. https://goo.gl/wv2Hbr -------------------------------------------------------------------------------
Просмотров: 712 MakerMan